xebruce 50 Posted October 7, 2013 What a mission. Ive got an xe Fairmont with a 302 put in it. First I removed the inner hand brake cable normally not too bad but the headers I have are a bit close to the 3 nuts. Had to bodge up a bit of a tool to get to one. Then the power steering box. No way it was coming out the bottom and didn't really feel like lying under the car taking starter and exhaust off. so took the brake booster out and removed it that way. Will take some photos of the tight spots tomorrow. Share this post Link to post Share on other sites
Farkin351 201 Posted November 30, 2013 Yes doing my steer box in my xd v8, yeh the manual actually calls for brake booster removal. Yep , pain in the ass job , but gives me a chance to respray booster again.. Lol Share this post Link to post Share on other sites
revhead 1,392 Posted November 30, 2013 i had an xd 351 fmont some years ago ,had to pull the column out i removed the starter as it was better then pulling the booster out,lol ,but i didnt have extractors ,so it made it a lot easier to get to the steering box 1 Farkin351 reacted to this Share this post Link to post Share on other sites