Jump to content

Mevans12

Members
 View Profile  See their activity

  • Content Count

    4

  • Joined

  • Last visited

  1. Mevans12

    Wheel/Rim Identification Help Required

    Mevans12 replied to Mevans12's topic in Wheels and Tyres

    Thanks for the reply Dave, i have just checked and they are welded.
  2. Mevans12

    Wheel/Rim Identification Help Required

    Mevans12 replied to Mevans12's topic in Wheels and Tyres

    Hi again. So i had a closer look at that rim and YES as ReVhEaD had suggested i found a stamp on the outside face of the rim that said "ROH MADE IN AUSTRALIA". So does this along with the small (60mm) centre hub hole confirm it as XA or earlier?? Your thoughts and comments would be greatly appreciated. Thanks in advance.
  3. Mevans12

    Wheel/Rim Identification Help Required

    Mevans12 replied to Mevans12's topic in Wheels and Tyres

    Thanks guys...SPArKy_Dave...by date code on the wheel, do you mean as in on the inside of the rim, literally inside the tyre? Just going by appearances i see things like this and wonder if its earlier than XD. But i am a noob. http://www.ebay.com.au/itm/161965315473?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
  4. Mevans12
    Hi all, I am trying to get a positive ID on this wheel, which i believe is originally from a Ford Falcon. The specs are as follows: 14" rim, 5 studs, stud diameter 12.7mm or 1/2", centre of adjacent studs 66.675mm or 2 5/8", PCD 114.3mm or 4 1/2", Hub Hole Diameter 60mm. Any suggestions/opinions would be greatly appreciated.
×