-
Content Count
1,600 -
Joined
-
Last visited
-
Days Won
2
Posts posted by BGDAV
-
-
i also had issues since i had a dart block, alloy heads, alloy intake etc, the weight was off was added issue - coil overs fixed it in an afternoon
deankxf reacted to this -
when i contacted them about mine, they said i installed the spigot wrong (i didnt), then they basically get fucked, it wasnt their business to fix their fuck up that cost me 3k, new gearbox rebuild after 600km, and redrill of a bellhousing due to poor machining - so i just tell everyone - cost them more then 3k in lost sales
jca25 reacted to this -
would not buy from dellow again, look at quicktime metal ones alot better
fotz and deankxf reacted to this -
look up the dimensions of a t56 magnum in the front position its perfect for xe console dead in middle - thats what I'm using
-
Is it a t56 magnum? Pretty sure u can flip the thing around back to front , I run the forward position on mine
-
have a look at this thread
-
I had a throw out bearing on my t5 I think you have to machine the snout down to allow the bearing to sit over - I’m sure USA guys have done it
408WPN reacted to this -
Yep that’s the one you need , the Ford stuff doesn’t work for the bore size needed for the slave cylinder - need custom mount but it’s all doable
-
i had a brief read over - I've got a 408 with a t56 mangun and hydraulic clutch, go hydrualic if you can, but its costly exercise, I don't use any of the standard gear but the hydraulic pedal box - better flywheel, FC holden master cylc (standard ford isn't enough even bored out) custom mounts, custom pedal stop (must do this or you'll blow out the seals on the slave cylc - I did it sucks) tilton throw out bearing (slave) i used malwood, and dellow slaves both leaked, pay the money once and do it right, tilton was self adjusting no spacer bull s*** all built into the design was a threaded shaft - solved all my problems- sounds like you have power similar to mine - its costly but now its all perfect
gerg reacted to this -
-
using standard ford fluid in mine for awhile, what would you rather kill a steering box or kill a ps pump ? i vote killing the ps pump if it ever dies due to incorrect fluid - but no issue
-
-
thats a 4x4 steering box - at the front of the cross member - that's not a datsun
where was the chassis rail number? i need to find mine soon
Boingk reacted to this -
gf had a similar issue on her ba , went into limp mode - battery was fked - try that first cheap option
-
Hmm I’d have to check
-
i had heard the XY powersteer can be adapted to use a XB-XF steering box without to much effort
-
-
On 1/25/2020 at 9:29 PM, deankdx said:the old .. hidden wiring hunt..
@BGDAV drove me nuts because he hid the wires for the speedo sender lol.. makes it hard to tap into when the plug and the loom are completely GONE from the engine bay lol.
To be fair I did leave it for 3 years and forgot what I did
deankxf reacted to this -
never buy dellow. they machined my bellhousing wrong and cost me 2k to fix a fuck up and refused to fix it
OLM8 and Slow250XC reacted to this -
fuck that .. monroe gt all the way
-
-
-
-
C4 to Tremec TKO600 XE conversion
in V8 Tech
Posted
im runing a t56 magnum, big case one and i had to custom make one as it sits alot further back then even the T5 mount - might just have to mock it up