thunderbolt

why you say its rich ?

A stock crossie with a 500 holley 2 barrel manifold, extractors/ 2.5 inch exhaust and a t5/3.23 diff will give those heavy shit heap VT-VY commos a good run at the lights. so many people see 250 motors as crap but they can produce heaps of mid range torque cheaply

pacemaker extractors 2.5 inch system one hot dog, one lukey ultra flow exiting out the right hand side. crow 141550S cam http://www.youtube.com/watch?feature=player_detailpage&v=4et9tAFp_b4

i didn't go looking Its some thing every one in Melbourne knows. chapel street is the same only the hookers are free and pissed but gotta watch out for the poofers in blue they will fuck ya hard up the tail pipe if ya in a car

its not st kilda rd its grey street where the hookers are

when you don't have the clutch lined up put the bell on and hook up the clutch cable then wedge a stick between the seat mount and the clutch pedal then put the gear box in the clutch plate can move around and the box will go in like a lubed finger in a bum

GTFO is that like GTHO but new

really the battery is in the way

you could re drill a single rail bell or buy one from dellow or Castlemaine rod shop

grease wont on the needle roller bearing spigot bearings play dough or plasticine might

thats a good one too

fill it with day old porridge e then get a bolt that's a snug fit in the hole and hit it with the hammer The squashing of the rubbery porridge will push the bearing out paper soaked in water for a day can be used too