superyob

Thanks ZK.

Thanks . I fitted a GT40R today and it was smooth as...  

Can anybody direct me to a shop that reconditions the canister type steer pumps? Or where I can buy a new one???

Are there any problems with running a GT40 coil on my ZD? It still has points. Sometimes it runs rough and wants to stall. Could that be because I should have a resistor coil on it?

I have been running a GT40 coil with my standard Bosch points system, since I rebuilt the 302W engine 13 years ago. It runs smooth as glass most of the time but sometimes grumbles and runs rough. I could never figure out why. Is it because it has a GT40 instead of a GT40R???

Well, it poured down last night. And no water in the cab...

Yes, I thought it may be handy info for those who have later model Falcons as well...

Not sure if this is in the right section but my BF ute always fills up with water on the passenger side after a good downpour. So I went searching for water entry points and found a couple of holes in the A pillar seams (under the rubber strip) whereby a piece of wire passed straight through. See attached pic. I have sealed it with a length of duct tape and if that works, I'll run a bead of sealer along the seam for a more permanent fix...