Neil Armstrong

costs me around 80 bucks to fill my ute on fuel, and i get about 300km around town use or 550ish on feeway, stock engine i think it has a tow pack cam and 5spd,

ill post some stats up of the turbo gas ghia when i get it sorted!

I always throught that car was twin turbo'd lol

why bother but, just run a wastegate and bov

Can't remember his name but Jason built and tuned it, can be seen on tunnel visions Facebook page, makes over 300 at the wheels was at all for day

Nice work dude

Intercooler will only cost like 140 bucks plus some silicone bends and clamps

Why go to all trouble of buying a turbo and not spend a couple hundred more and invest in a intercooler and a efiomanifold, ill sell you one with fuel rail for 50 bucks lol

There was a thread on Xfalcon, of a guy who fabricated his engine mounts, wouldnt really be 2 hard if you ask me,

you have the 3 bolts that hold the plates on the crossmember, then the 3 holes that hold the engine mounts onto the side of the block, could easily fabricate something with a big fat noathane bush on it

what have you done to engine? lol mines turbo'd and the stock mounts hold.

i know that, its a custom blend to make a close match, they do stock most falcon colours, eg paint code Z, its a white that came out on alot of utes and fe ltd's etc.

for what? 250, 351? xe xa ?

I got quote hanging around some where, it was about 1800 bucks for topcoat / clear.

reason being is they don't make the colour, its mix up on the spot so can never match it.

XE front wont be hard, but when you go to buy paint jade green, you'll get a nasty shock, its a rare colour and to do my hole car in 2k is fucking expensive.

Found this, has glimore drive or strait cuts etc.

pretty engine bay mate, sounds nice!

Both sound the shit.  Those extractors look wilder than a stripper given a thousand bucks.

hahahahhah!

sounds good, did my video link work?>

Let me know if link doesn't work.

250 Crossflow exhaust,

Name what you have, what you've done etc.

Mine is a 2.5 inch exhaust, with 1 rear muffler, normally run a 2nd hotdog muffler in the rear but ive taken it out, and now sounds like this.

also custom made extractors.

Hopefully link works.

http://www.facebook.com/video/video.php?v=522193877818712

Subscribed!