-
Content Count
64 -
Joined
-
Last visited
Posts posted by Luke13
-
-
Yes but the AC isn't working but is exactly the same as in the pics. And I don't plan on fixing it
Thanks
-
Hi all the next job on my xflow is putting the 4 barrel manifold and carby on can anyone help with what vacuum lines I will need and where to connect them to. And what vacuum lines and pvs I can remove when I take the Webber off.
It was a auto but is now a manual
Thanks
Sent from my Pixel 3 XL using Tapatalk
-
Thanks mate that's a great idea to make a kill switch
Sent from my Pixel 3 XL using Tapatalkgerg reacted to this -
Hi all I am finally doing my conversion and I am making sure I have thought of everything I need to do and making sure I have all the required parts I am sure I have everything covered now but I am unsure what do I do with the auto neutral switch
Thanks
-
Yea Iol I was rather frustrated it stopped me putting in my T5 I had organised to use a mates hoist yesterday but couldn't drive the bloody thing there because of 4 little bolts I had to order them in it was the 5th different thread I tried lol
Sent from my Pixel 3 XL using Tapatalkgerg reacted to this -
Thanks for all the help I found what thread they are it's 5/16 24
Sent from my Pixel 3 XL using Tapatalkmacman and gerg reacted to this -
All good mate thanks for looking
Sent from my Pixel 3 XL using Tapatalk -
Awesome thanks mate
Sent from my Pixel 3 XL using Tapatalk -
Thanks mate that's a size to start with
-
No bolts came with it wish they did it would save me a lot of running around but it they are metric I would assume m8 just have to guess the thread
gerg reacted to this -
Thanks mate
-
Yea I needed a new pump and I am changing to thermal fan so I cut off the thread for the clutch fan but the bolts that hold the pulley to the pump are different thread so I can't put the pulley back on lol. I will run to the shop tomorrow and get a few different thread 5/16 bolts and hope one of them fits the flange to pulley
Sent from my Pixel 3 XL using Tapatalk -
Yea mate the AC one
Sent from my Pixel 3 XL using Tapatalk -
Hi all I just fitted a GMB water pump and the flange for the belt pulley is a different thread than the original does has any one else had this problem and are xf possibly a different thread to xe. It's on a xflow
Thanks
Sent from my Pixel 3 XL using Tapatalk
-
That sounds like the same as mine I will give it a go thanks
Sent from my Pixel 3 XL using Tapatalkdeankxf reacted to this -
Thanks guys I will give it another shot today
Sent from my Pixel 3 XL using Tapatalk -
I am replacing my water pump on my xe 250 crossflow how the hell do you get the AC bracket out of the way so I can install the new water pump
Thanks
Sent from my Pixel 3 XL using Tapatalk
-
Awesome thanks mate
Sent from my Pixel 3 XL using Tapatalk -
Hi all I am about to take my bw35 out to go manual do I need to plug were the lines go into and out of the radiator for the trans cooler.
Here is a pic I found that shows them clearly
Thanks
Sent from my Pixel 3 XL using Tapatalk
-
Thanks mate let's hope I can make it work lol
-
Hi all are the auto and manual humps the same I am going from bw to t5.
Thanks
-
Thanks mate that's what I was planning to get
-
Awesome thanks mate
-
What about diameter issues would 9 x 2 or 12 x 2 work I only plan of revving it to around 5000 so I might get away with out the spacer
450 quickfuel installation help
in Crossflow
Posted
Thanks guys I will have still have the stock distributor should I be changing it thanks for all the help
Sent from my Pixel 3 XL using Tapatalk