-
Content Count
64 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by Luke13
-
Hi all the next job on my xflow is putting the 4 barrel manifold and carby on can anyone help with what vacuum lines I will need and where to connect them to. And what vacuum lines and pvs I can remove when I take the Webber off. It was a auto but is now a manual Thanks Sent from my Pixel 3 XL using Tapatalk
-
Thanks guys I will have still have the stock distributor should I be changing it thanks for all the help Sent from my Pixel 3 XL using Tapatalk
-
Yes but the AC isn't working but is exactly the same as in the pics. And I don't plan on fixing it Thanks
-
Hi all I am finally doing my conversion and I am making sure I have thought of everything I need to do and making sure I have all the required parts I am sure I have everything covered now but I am unsure what do I do with the auto neutral switch Thanks
-
Thanks mate that's a great idea to make a kill switch Sent from my Pixel 3 XL using Tapatalk
-
Hi all I just fitted a GMB water pump and the flange for the belt pulley is a different thread than the original does has any one else had this problem and are xf possibly a different thread to xe. It's on a xflow Thanks Sent from my Pixel 3 XL using Tapatalk
-
Yea Iol I was rather frustrated it stopped me putting in my T5 I had organised to use a mates hoist yesterday but couldn't drive the bloody thing there because of 4 little bolts I had to order them in it was the 5th different thread I tried lol Sent from my Pixel 3 XL using Tapatalk
-
Thanks for all the help I found what thread they are it's 5/16 24 Sent from my Pixel 3 XL using Tapatalk
-
All good mate thanks for looking Sent from my Pixel 3 XL using Tapatalk
-
Awesome thanks mate Sent from my Pixel 3 XL using Tapatalk
-
Thanks mate that's a size to start with
-
No bolts came with it wish they did it would save me a lot of running around but it they are metric I would assume m8 just have to guess the thread
-
Thanks mate
-
Yea I needed a new pump and I am changing to thermal fan so I cut off the thread for the clutch fan but the bolts that hold the pulley to the pump are different thread so I can't put the pulley back on lol. I will run to the shop tomorrow and get a few different thread 5/16 bolts and hope one of them fits the flange to pulley Sent from my Pixel 3 XL using Tapatalk
-
Yea mate the AC one Sent from my Pixel 3 XL using Tapatalk
-
I am replacing my water pump on my xe 250 crossflow how the hell do you get the AC bracket out of the way so I can install the new water pump Thanks Sent from my Pixel 3 XL using Tapatalk
-
That sounds like the same as mine I will give it a go thanks Sent from my Pixel 3 XL using Tapatalk
-
Thanks guys I will give it another shot today Sent from my Pixel 3 XL using Tapatalk
-
Hi all I am about to take my bw35 out to go manual do I need to plug were the lines go into and out of the radiator for the trans cooler. Here is a pic I found that shows them clearly Thanks Sent from my Pixel 3 XL using Tapatalk
-
Awesome thanks mate Sent from my Pixel 3 XL using Tapatalk
-
Hi all are the auto and manual humps the same I am going from bw to t5. Thanks
-
Thanks mate let's hope I can make it work lol
-
Hi all I am getting parts together for putting a four barrel on my xe I have a four barrel Aussie speed manifold and a quick fuel 450 carb what size air filter will fit under the bonnet Thanks
-
Thanks mate that's what I was planning to get
-
Awesome thanks mate