robbie

the price difference is pretty much double.. $520 odd for the cast steel, and about $1100 for the 4340

if Pavtek are running them in their 550hp 393's - that speaks volumes.

Thanks to all who chimed in!

Hey all

Just wondering if anyone has had experience with the SCAT 9000 series stroker cranks?  

Looking at it for a budget build - use will be predominately street, with an occasional blast down the 1/4.

They have come down a lot on price since I last looked so they are very appealing.

Rob

Thanks fellas

I've just gone out to the garage and had a look at the pan fill C4 I picked up years back for my XT, and I think its actually a C5..  After some quick research, the casting code on the side of my supposed C4 turns out to be a C5....

Mr C4 can you please confirm?   It's also got the R servo on it, from memory you liked these?

Greg AKA Mr. C4

Looks like a really great starting point mate, keen to see more

Finally found this build Jase, dont know how the heck I missed it.  Anyway, thumbs up to ya.. your work is top notch man!  Cant wait to see more

When she's all sorted, this little roadblock with the pv clearance will be a forgotten memory

Just like the great wall of china was built to keep the rabbits out................haha

edit - too bad thats a damn ad for tel$tra.

lol gerg.. now that you mentioned that, you gotta somehow find some pics for us all to have a laugh at

The Edelbrock RPM Air Gap is always a good choice for a street cruiser -

http://www.edelbrock.com/automotive/mc/manifolds/ford/rpm-air-gap-351c.shtml

Probably one of the better dual plans out there

Nice port job on the TFC.

4V's rock out of the box with their intake flow results.. did you flow the exhausts too back in November?

Hey mate, always recommend these guys - Dandy Exhausts

http://www.dandyexhausts.com.au/

If you really want the dumped at the diff idea, get a full system made up and have it flanged before the diff so you can take the tail pipes out, get your jollies and put them back in when you get sick of it

gerg top thread buddy, but ...

For emergency cleaning of greasy hands to touch the missus : laundry detergent

^^ this... Spot on  emergency cleaning to go for a grab 

In Casey area?  Dandy Exhausts are always good.

Theres also a joint in Berwick, havent used them but heard a few good things about them.

hahaha

I been keeping really busy gromet, but I'm getting some spare time back so I'll be around a bit more

btw, section created and this is the first thread

Tyres and wheels, yep its not really covered!  We'll most likely get this up, I'll report back soon.

Thanks for the tip/idea.

Awesome stuff man, cant wait to see them welds tucked nicely.

Thats a good idea.. Did it work on the video?

Yeah mate, give it a go.

I reckon save your pennies on the tube bender, they'll crush the tubes causing a restriction

Buy a crap load mandrel bent bits and cut/join them up as needed

Top effort Ken! Well done.

^^ I'm with Ants.

edit and Alec lol

Rob you forgot - skid marks in pants of any passengers after all said skids are peformed

Was wondering the same thing Dean.. Definitely do it to the transit, would sound great.

Good to see you around the traps Mark.  Long time no speak.

That info is priceless so no issues.

I'll check in with ya son to catch up.

Rob