car10001

Hi In the area below icc what other brand and model touch screen stereos fit there besides the sony https://www.sony.com.au/electronics/...rs/xav-ax205db one in this kit https://www.universalfuze.com.au/son...-and-dab-radio Has anyone got any idea, looking to upgrade stereo and auto electrical people think it’s best to have a seperate stereo system and keep it simple. Thanks

Would it be worth trying to mount a double din in a ba below icc. want dab+/am/fm/cd and to have carplay and dual usb or wireless carplay and usb to be able to connect phone and usb drive at same time. found a few normal stereos that have the smart sync feature in pioneer and they would be close enough but none have dab+ that’s only thing but otherwise could have got a rgb box to convert the icc screen into reverse camera. need to know soon as possible

What would you go with out the alpine iLX-F309E (mount cd player remote) or kenwood DDX9019DABS or pioneer AVIC-Z720DAB or sony xav-ax205db or iLX-W650E (is there a way to mount cd player remote and connect to aux and is there carplay and is is wireless carplay dual usb want dab+ And carplay and to be able to connect phone and media at same time wether it has dual usb or a usb and wireless carplay

Does anyone know

There’s a sony one that has a single din rear but has a double din touch screen to fit in smaller areas universalfuze even do a kit. would this be only stereo that fits ba/bf that has dab+/am/fm, noticed that it only has one usb and there’s only wired apple car play so you can’t connect phone and media storage at same time. Is there another stereo like like this one that sony one that has dual usb or wireless car play to connect both phone and media at same time and dab and cd and am and fm or is this as close as we will get unless you buy a alpine one that replaces factory screen that allows you to connect the climate panel to it like in some of the ve holden which means you have to get another icc to mod.

hi just wondered what the 5l 302 v8 is like on fuel compared to the ohc 4l 6 cyl in the e series model if anyone has a eb/ed v8 like in this youtube video would they be able to answer what theirs was like on fuel thanks

Hi everyone was wondering what’s best way to get a tx valve ac system working off a au v8 ecu. what wire on ecu harness is for clutch engage also can you get the fittings for au pressure sensor and fittings welded onto e series lines so all just plugs straight in thanks

Where’s the third single wire sender for gauge have seen the other locations

Is there a third one for dash gauge in the eb/ed v8 ifso wheres that

Hi Have a ba ghia now and am looking to get a new stereo touch screen. Have found a ba/bf kit from universalfuse https://www.universalfuze.com.au/sony-car-play-android-auto-with-dvd-and-dab-radio and while it’s supposed to be good you’ll loose the storage area that’s left under the kit that’s used to mount a single din unit. Is it going to be a problem loosing that bit of storage and where do you put that stuff that you’d normally store in that area. Plus with the sony kit you got to buy a navigation kit if you want to use gps without plugging in phone. Apparently that sony kit is a double din size screen with a 1.5 din fit. Also there’s a kayhan audio icc system https://kayhanaudio.com.au/product/ford-ba-bf-territory/?gclid=EAIaIQobChMIrsf3_Kq04wIV2RwrCh0vdg16EAAYASAAEgKb6fD_BwE This kayhan kit is a whole new icc for ba/bf which has same features as the sony kit plus more. And you can keep the single din cd player mounted below plugged into aux to play occasional cds. With the mounting kit in the link to sony system for ba/bf what is done with it to get the big screen through it. Is there a chance that you can get normal double din size to fit or does the fit have to be 1.5 din. Do pioneer or kenwood or jvc do those big screen with a 1.5 din fit like the sony link. Would it be better to have the stereo separate to icc or get a whole new icc. What us kayhan like and what’s chance of factory screen going out if it still works. What would you do out of these options 1. Replace icc with whole new icc and leave the single din cd below plugged into aux to play occasional cd. 2. Buy the sony kit that’s in link (would you cut icc speakers and connect them to new unit or just use aux. 3. Try and get a normal double din in. 4. Look for another one like sony link that has built in gps that’s a good brand. Thanks

Already have a el ghia v8 engine bay harness and nearly a whole car harness and only need to swap plugs and add a couple wires for ed dash to work and the tcu connectors or preferably the behind dashboard harness out a el v8 with cruise control. if you were to buy a stand-alone eec4 v8 harness how would you connect it to the wiring that’s already there in the ed, will the eec have the transmission computer or would you still need a separate one any chance you can attach picture of exact exact location for climate sensor and seperate dash sender in ed v8, have noticed the ecu coolant sensor is behind thermostat screwed into heater pipe

Do have el v8 engine bay harness and both tcu and ecu just need wire with the connectors to go on tcu wheres the climate sensor in eb/ed v8 fairmont can make the el ghia v8 harnesses work on ed dash just need to swap plugs and run wires out to seperate climate and temp sensors, someone used eb wiring in a el dash years back when doing el dash in eb

could you fit the au lines with what it came with and change ends to ed fittings to go on condensor and dryer and will the ed climate panel work as someone on fordmods think members name is timmya or something fitted all au wiring and au ac system and made it work on ed aircon panel and changed condeosor and dryer end to go on ed front

hi everyone getting a ed which is only a base model but plan to bring it to fairmont level and put a v8 in and instead of putting eb/ed abs with seperate ecu in plan to put in ef/el abs with all in one pump/ecu. also instead of using eb/ed vacuum cruise control plan to use ef/el electronic cruise control and el thermo fans instead of the belt fan and want to keep the original ed dash setup. out of the below options which would you go with. 1. use all el wiring harness and change tail light connectors and also interior connectors where needed to allow the original ed dash to work. 2. use el floor harness and change tail light connectors and the right kick panel connectors for it to go into ed drivers side engine bay harness and use the ed drivers side engine bay harness and solder a ef/el fusible link block, ed dash harness, el v8 ecu harness and splice it into the ed wiring with diagrams. 3. use all ed 6 cyl fairmont wiring and pull out the wires for cruise control as ef/el cruise control will be getting used and solder ef/el fusible link block into the ed drivers side engine bay harness and use a el v8 ecu and tcu harness and strip down a el drivers side harness to get the thermo fan block and wires out and make a independant thermo fan harness that has power wires to run around and connect to battery and has plug with the trigger wires to go to the ecu and run the trigger wires from the ecu out through the passenger ecu harness with plugs so the fan harness will plug in. also will then solder the ef/el pillar wiring connectors onto the ed wiring do the ef/el door harnesses plug in. (this option will mostly be ed wiring with some changes to the body harness with removing cruise control wires and passenger ecu wiring with the independant thermo fan harness plugging into the ecu harness and running power wires to battery) is the ed fairmont bcm really hard to find in south australia or would you solder the el fairmont bcm plugs into the eb/ed smartlock and bcm wires if using mostly ed wires except el v8 ecu harness. any help would be great thanks

Hi Just wondered 1. Does the au sedan boot harness fit the ba sedan and is those black bits that goes between the boot and below back window same between the au and ba model both being sedan. 2. Is the sedan boot harness same between the base model sedan and ghia sedan in the ba sedan model Thanks

They appear to be same there’s a au boot harness on ebay and the black part appears to be same as the ba

hi are the transmission cooler lines in the territory and sedan both in the ba vintage same thread at front end. found a transmission cooler for a territory that fits upto a 2005 model and has fittings to screw onto metal lines and was going to get that if the fittings will go on the ba sedan lines and if both are same thread at radiator end. thanks

hihave a ba ghia and was wondering the best way to install a aftermarket amp and sub ready for a aftermarket android dash icc/aftermarket head unit replacement.where the factory amp is can you unplug the connector and is there a sub output that goes from icc to amp you can use to connect to aftermarket amp and ifso do you need a line to rca converter and ifso which one.at the factory amp connector there would be input wires from icc, could you use them with a rca converter for aftermarket amp.or can you just get the line converter that goes on the rear speakers and run rca cable to amp from that.obviously you'll have to remove factory amp to install aftermarket amp and if you bypass the icc then youll just be able to run twin rca cable.the android units have one rca for factory amp and sub and rca front and rca rear out but no rca aftermarket amp, could you use the rear or front out to go to aftermarket amp.what would yous do out of getting the complete replacement aftermarket icc and leaving the factory one and hope the icc doesnt go, and getting the double din touch screen that has a single din mounting like the sony https://www.universalfuze.com.au/son...-and-dab-radio headunit.if you go something like https://www.universalfuze.com.au/son...-and-dab-radio what steering wheel control module would you need. does it have gps built in and how would you go about a spot to put things as that would take up whole area and you loose the tissue box.also if you go the complete aftermarket deck will cutting the speaker cables blow up the icc and how would you stop that chance of it happening.if you put bullet terminals on dont spose itd take much to put back to factory wires so aftermarket icc works.with these aftermarket icc whats the sound output quality like and are you better going that way and just have a single din cd player and connect that through aux so you can play occasional cds.thanks for any help/answers/for reading this

what about information for the questions asked for the cameras

Hi just a couple questions 1. Could you make a ed climate control panel work on el ghia v8 wiring and what’s best way to make it work. Swapping plugs would be easy if you follow diagram. Was thinking go through a ed and el diagram and work out what needs changing. 2. When using a el v8 ecu on a ed trip computer are you able to cut the pwm wire at trip computer plug and run new wire then splice into pwm injector pulse on the v8 ecu like you can with the 6 cyl. thanks

Hi just a quick question what causes a ba to whistle on acceleration, alternator or belt doesn’t seem to squeal when using headlamps or loading electrical system, engines pretty quiet someone just wondered thanks

Doesn’t seem to be major drove for about 15-20 mins yesterday and parked it then it started this morning so can’t be charging system then?

And where’s antenna plug and what type is it

Hi just wondered how you would be able to install aftermarket stereo in ba/bf and how you could make original steering wheel buttons work. what parts would you need and where would you wire your speakers and power to and where would you connect to steering wheel buttons thanks

Hi Anyone that’s done a ef/el cluster to a ea-ed and a nl fairlane cluster to a ea-ed please can they say how they did it and put up any wiring diagrams on how they wired them up, Looking to add nl fairlane cluster to a ed but the opposite way so the ef/el/nf/nl to ea-ed would still apply Thanks for any help with diagrams Thanks