XFute-1JZsoarer
-
Content Count
461 -
Joined
-
Last visited
Posts posted by XFute-1JZsoarer
-
-
I know how bad they are, but don't really have a choice, the key I got with the XG ignition is stuffed, so doesn't work.
Besides, a kill switch is already installed for that reason (guess it works, it's been broken into, never taken though)
I found brand new XG ignition barrels (with 2 keys) on eBay for $44 shipped, but doesn't come with door locks
And I don't really want to change all the door locks to match a new key if I don't have too.
If smartlock is disabled with a J3 chip (ordering one this week), do you think it would work?
-
I can find out tomorrow bud, mines in storage at the mo, but I'll be goin out to do some work tomorrow, so I can measure it up then if you don't get a response tonight.
78xcgxl reacted to this -
XF was a T5 like the rest, so that's still earlier than EA.
But yes, no decent ones till then...
-
Maybe, my point was that it was in the XF as well as the EA, except the XF uses the crossflow bellhousing
I was just correcting gerg that falcons used 5 speeds since as early as 1984
Still a fair bit later than the jap cars...
-
Cheers Gav
Spot on info again mate, thank you for the help.
-
XE had a 5 speed, although a rather weak one at that (I actually have 1 for sale. Lol), and the XF came out with a T5
Which incidentally is the bellhousing I've been lookin for (for weeks now) with no such luck, so I'm just going to focus on the entire driveline swap instead I think.
Don't want to put too much money into it, as I already have a full XG driveline.
-
-
Ok, I worked out how it's installed after I pulled the ECU apart and saw the "J3" port where the plastic cover clips in to the casing.
It all makes perfect sense to me now! Lol
-
After a bit of thought, I've decided that I'm going to order a J3 chip to get around the whole smartlock hassles.
And the key I was given doesn't work in the barrel, so I might find another key and barrel from the wreckers.
Just wondering if anyone can tell me how it's installed, and do I just leave the smartlock plugged in, or can it be removed from the dash completely?
Thanks again in advanced.
Jay
-
Thanks guys, I'll have a quick look.
-
Cracked open the manual XG ECU, as it is little corroded on the casing, doesn't look to bad inside...
Doesn't appear to go all the way down to the board though, so it's not looking too bad now.
Is it possible to change the casing with another similar ECU (EB 3.9L) because they look similar?
(EB auto on the left XG manual on the right)
And I found my EA-ED manual too, so that was a bonus!
-
Think I might just focus on the swap instead, I'll chuck the crossy up for sale instead of tryin to destroy a 180000km engine just for shits and giggles.
Would have been fun though. Lol.
-
How can I tell if it's the old floor or not, is there any telltale signs that could tell me without gutting the interior to see it?
Not that it matters I think, it has a rubber floor in it instead of carpets.
I'm a little amazed at how cheaply put together an XF ute interior is.
Half of it looks like it was slapped in just to cover a hole or something... Lol
Appreciate the help guys. Cheers.
Jay.
-
Oh, and it's an 88 model, I dunno if it's got EST, might go have a quick look.
-
Cheers 78xcgxl, I got the laying out part sorted, just wanted to hide most of it where possible.
Gav, your a deadset legend mate!
That's exactly the sort of info I'm after bud, thank you very much!
That module, where did you get it mate? I think I'd rather do that.
Does that mean I could use the XF's ignition with it or would I still need to use the XG's one?
It's a shame the XG dash is cracked (the XF's is good), I'm going to need to put a dash mat over it or something for now.
I just want to get it all in and running, then I think I'll change the dash and cluster for a better one...
-
Ahhh ok, I got ya mate.
Finding info about it is almost making me bold from ripping my hair out. Lol.
I think I might give up on it and just focus on getting the swap sorted.
Thanks for the help anyway mate, very appreciated!
Cheers.
Jay.
-
Thanks Mr Polson, you been running it with that oil for long, no issues with it I'm guessing?
It's a fine line between useful and useless info bud, I found it useful
gerg reacted to this -
Mr Polson, you think an XC falcon one will be alright, I can get one for $55 posted, but not sure if it will be ok to use?
-
Thanks for the lesson gerg, very handy mate.
Cheers eh!
-
-
Some handy info there mate, really appreciate it.
How much you want for it Gav?
Cheers mate.
Jay.
-
Do you remember what title they were selling it under, the one I found was just a parts catalogue, and it was $14
Thanks Demmo.
-
Damn! $75 if you are not in Australia, or $82.50.
I might just try and use the EA-ED one I have already.
Hopefully a used one pops up on eBay, can't bring myself to pay that much for it. Lol
-
Thanks Jack, I'll check it out now bud.
Jay.
Anybody using a J3 chip?
in Auto Electrics
Posted
I'm ordering a stage 1 J3 chip from TI performance to disable the smartlock for my XG into XF conversion.
If I have the chip installed, does that mean I can eliminate all the wiring from the smartlock module and ignition to smartlock wires?