cruzzin62falcon

Hi ive just fitted a XD alloy head crossflow with a c4 auto to my XM ute and would like to fit extractors just wondering if anyone has done this and which ones they used, ive looked at the Cortina ones and not sure if they will fit any help would be appreciated Thanks

I did feel it engage when I first put the convertor on and before I bolted it on it all seemed ok but once it was bolted up is when it was solid and unable to spin when I removed it the convertor wouldn't spin but can be removed, I'm wondering if it has moved out of position when I put it on then I've tightened it up and damaged something in the gearbox.

Hi I have a crossflow from a XD and a c4 from a mates v8 mustang which came with a torque convertor the convertor bolted to the flex plate fine and I bought a c4 to crossflow bell housing so it went together fine. Before bolting it all up I started the motor and no worries then bolted up the gearbox and im unable to turn it over I removed the gearbox and I still can't spin the convertor, just wondering if all the parts I have are correct or maybe I have damaged the gearbox bolting it all together, if anyone could shed some light on this I would be grateful thanks Craig