steveheffo 1 Posted April 10, 2016 Hello everyone, I have fitted an au 2 ghia dash to my series 1 ute I have changed all the wiring looms to the series 2 including the ecu etc. but was wondering about the abs system if the ecu doesn't find it will I have issues and if so how hard is it to retro fit the system I have installed the series 2 front end so i guess it is just the module and the sensors and brake lines but if i don;t need to do it i won't bother but I am wondering about the electronics not finding the system ...... any thoughts ? thanks Steve Share this post Link to post Share on other sites