xander57

Thanks for the replies i'll be going with studs then

Sorry for the stupid question but is there any difference between standard manifold bolts and extractor bolts i know there supposed to be shorter but anything else?

thanks guys i'll start looking into it

Isn't it different to the standard ecu?

Got a 94 ef futura previous owner put a 95 xr6 engine in but didn't change ecu. Can I put the xr6 ecu in with no problems??

Hey guys thanks for the replies I finally checked it all out properly turns out it was the dizzy.

Hi I've got a 87 xf carby with est got no spark I put a new coil still nothing I checked the coil wires they show 12.34v connected to coil it drops to 0.01v (not sure if that's normal). I also ran a plug off the coil when you turn ignition on it sparks once turn it over and nothing and sometimes sparks when you turn ignition off. Does anyone have any ideas

Yeah sorry its a crossflow but can you do that while its in the car or does the engine have to be taken out

Thanks for the reply

I just started my car after two years. It goes alright except its not pumping oil up.

Do you have to take the engine out to replace the pump or is there an easier way??