Jay Baby

Just decided I’m going to do a dash cluster light conversion while the cluster is out Cheap as chips on eBay be mad not too

No problem I will keep it up to date until it’s finished and my kms are ticking over again

Yeah I might just drop cluster in to speedline they only charge $130 to fix it and at least if something is wrong I can take it back to them. Appreciate your time bud your a champion

Not sure about pulling this cluster apart now looks very fiddley

Bahaha I will put em back 100% can’t be one of “them people”

Ok,so off to a good start with the cluster removal but I can’t find the last 2 screws iv found the tops and the sides as pictured. Iv removed bottom of dash to get access to hidden ones but can’t find them I have also left the light, haz switches ect in as I’ll just unplug them after. Also pulled wheel. Please give me a heads up where to find these 2 last screws just found em.... after some acrobatics

Ok,so off to a good start with the cluster removal but I can’t find the last 2 screws iv found the tops and the sides as pictured. Iv removed bottom of dash to get access to hidden ones but can’t find them I have also left the light, haz switches ect in as I’ll just unplug them after. Also pulled wheel. Please give me a heads up where to find these 2 last screws

Yeah well it’s on a boss kit anyway with a wood grain wheel, so I’ll just pull the wheel as it’s easy as

Legendary cheers bud

just out of interest if I was to replace the gears myself am I looking at the correct ones? And is there two in there so you replace both or just one?

Cheers for the response lads this is exactly why I joined this page. Can’t beat real experience This will put me off to a great start. And yes after I have the cluster I may even look into swapping the plastic gear as at worst if I mess it up I’ll still be in the exact same position of dropping the cluster at the shop. cheers lads I’ll keep you posted on how I get on