Fordcrazy

Who do I contact regarding the valve springs and gasket 

Can I run 15psi boost on a stock enngine

So I run the turbo on the standard engine what size turbo must I use and to what boost can I go to

3 minutes ago, Valvebouncer said:

Most likely it’s out of an ef falcon so it should have a coil pack and crank trigger and sensor above the balancer. If it has a distributor it’s an early el falcon.

When looking at the front of the engine, the intake will be on the right side and below that around cylinder no3 there should be your oil pressure switch. Just run a t piece out of that to feed the turbo. For the drain you can run it straight into the side of the sump.

So I run the turbo on the standard engine what size turbo must I use and to what boost can I go to

I"m at work at the moment the Number on the block is 95DA 6059-AA SOHC

It is an AA Block if I'm correct

Don't know I just bought the engine 

Hi Guys

What prep work do I need to do to a XR6 tickford block is there oil port that I need to reduce or blanked off prior to turbo it and what size turbo would be efficient for the

4.0L