motoSycho 690 Posted April 22, 2022 Arghhh, I was on my phone a couple of days ago and saw a post from someone selling a front brake setup for an XF, using a BA caliper. I can't find it now, but I was wondering if anyone else has done this, and how they did it? I have the front calipers sitting on the BF here. If I can use them, that would be great. Share this post Link to post Share on other sites
deankxf 20,231 Posted April 22, 2022 i'd check if Hoppers Stoppers or CRS use the BA caliper. i think UPC used the VT caliper that i fitted to the XG i had once, then had bias issues (would lock the front too easily) if so you'd need to address that(can't see a listing for them anymore on ebay) Share this post Link to post Share on other sites
gregaust 315 Posted April 22, 2022 Just be aware , A BA/BF caliper is setup for a 28mm thick rotor . A few years ago a mate got a kit that used the bigger calipers on a factory 24mm rotor . Sure it's ok while everything is new The UPC kits did work ok but no longer made I have an RRS strut setup uses a VE Commodore caliper & 300mm rotor , they are brilliant 1 deankxf reacted to this Share this post Link to post Share on other sites