IVC434 65 Posted June 23, 2021 Hello everyone. I'm wondering if anyone can please help me with sourcing a "guide pin anti-rattle clip" for my original PBR calipers on my XC... One of them was snapped in half when I removed the calipers, so I don't know when it happened, or where the other half of the clip could possibly be. The brake shop I deal with (who are actually fantastic) said that they can't help at all, and they can't even source them aftermarket, because they aren't being made any more... I'll even consider buying an entire caliper if needed... I've seen this listing on Ebay listed for a Holden PBR caliper, but it looks very similar to the one that I need. https://www.ebay.com.au/itm/HOLDEN-HQ-Front-PBR-CAST-CALIPER-ANTI-RATTLE-SPRING-CLIP-FULL-SET-NOS-/361481033718?_trksid=p2349624.m46890.l49286 Is it possible that it might be the same part? Any advice or assistance is greatly appreciated. Thank you. Share this post Link to post Share on other sites
deankxf 20,233 Posted June 23, 2021 8 minutes ago, IVC434 said: Hello everyone. I'm wondering if anyone can please help me with sourcing a "guide pin anti-rattle clip" for my original PBR calipers on my XC... One of them was snapped in half when I removed the calipers, so I don't know when it happened, or where the other half of the clip could possibly be. The brake shop I deal with (who are actually fantastic) said that they can't help at all, and they can't even source them aftermarket, because they aren't being made any more... I'll even consider buying an entire caliper if needed... I've seen this listing on Ebay listed for a Holden PBR caliper, but it looks very similar to the one that I need. https://www.ebay.com.au/itm/HOLDEN-HQ-Front-PBR-CAST-CALIPER-ANTI-RATTLE-SPRING-CLIP-FULL-SET-NOS-/361481033718?_trksid=p2349624.m46890.l49286 Is it possible that it might be the same part? Any advice or assistance is greatly appreciated. Thank you. that ebay link (for Sunbury brakes) is a good seller generally(he did stuff up with a members master cylinder once and was rude about it, saying that's what your ordered.. your fault etc) however i've ordered clutches and brake parts from him before. i'd use the "ask seller a question" and see if he can confirm it's the same as the ford one.. otherwise the only wrecker i'd know would have one (either a complete caliper or just the parts) would be LUKE GT in Melbourne https://www.facebook.com/groups/539507089467774/ specialises in the older falcons Supplying spare parts for Falcons, Fairlanes and LTDs built between 1972 and 1984 0427 318 701 (Luke) 22 Killara Road, Campbellfield Vic 3061 Monday - Friday 8:30am - 5:00pm Saturday 11:00am - 3:00pm See less 1 IVC434 reacted to this Share this post Link to post Share on other sites
IVC434 65 Posted June 23, 2021 11 minutes ago, deankdx said: that ebay link (for Sunbury brakes) is a good seller generally(he did stuff up with a members master cylinder once and was rude about it, saying that's what your ordered.. your fault etc) however i've ordered clutches and brake parts from him before. i'd use the "ask seller a question" and see if he can confirm it's the same as the ford one.. otherwise the only wrecker i'd know would have one (either a complete caliper or just the parts) would be LUKE GT in Melbourne https://www.facebook.com/groups/539507089467774/ specialises in the older falcons Supplying spare parts for Falcons, Fairlanes and LTDs built between 1972 and 1984 0427 318 701 (Luke) 22 Killara Road, Campbellfield Vic 3061 Monday - Friday 8:30am - 5:00pm Saturday 11:00am - 3:00pm See less Thank you so much. I've sent him a message. Hopefully they're a match. If not, I'll definitely get onto Luke. I'll follow his page right now... Greatly appreciate your help... 1 deankxf reacted to this Share this post Link to post Share on other sites