Drivers door key lock

[David seagull 9]

Can someone tell me if the door key lock on a xh suit any other model as my one has broken off the plastic bit which the rod clips onto  

Just trying to find another for the drivers door 

Cheers

[dvfalcon 375]

DGN with what the call the Tibet Lock will most probably be the same xf and earlier work differently 

c

Dale

[deankxf 20,979]

pretty sure XG and XH are same, but thats' all. they are different to XF and MAY be same as EF EL(even EB ED ) in some aspects(they have the lock in the door handle, but the back plastic bits might be same?)

[deankxf 20,979]

JB WELD ? glue it back on https://www.jaycar.com.au/j-b-weld-epoxy/p/NA1518?gclid=Cj0KCQiA-aGCBhCwARIsAHDl5x9jQe_NpB5ZTOUE0Ng7u-eI6Lz08I8Mp1ZylIv885IuN_JxOxSQEQUaAuBoEALw_wcB

[David seagull 9]

I did with loc super glue but it broke again 

[deankxf 20,979]

1 hour ago, David seagull said:

I did with loc super glue but it broke again 

JB Weld can be drilled and tapped. it's amazing stuff.. depends where it broke and if you can have a massive blob around it to reinforce(i can't remember what's needed on that part)
LOCTITE brand super glue isn't bad,  but JB Weld is amazing if you have space for it

 

[dex 2,066]

Kingswood  Country have anything alike ,?

 

could you post a pic of your broken one ,?

[deankxf 20,979]

no idea what the quality of these are like..
might be able to just fit the plastic part?

 

https://www.ebay.com.au/itm/Door-Lock-Ignition-Barrel-2-keys-Fit-For-Ford-Falcon-XG-XH-Ute-Van-1993-1998/324501420657?hash=item4b8dcaba71:g:8YEAAOSw2XJgO2a4

[SPArKy_Dave 9,314]

The plastic part is available separately from lock suppliers like LSC, I believe.

 

https://www.lsc.com.au/Products/Locks/Automotive-Motorcycle-Bikes/Automotive-Motorcycle-Spares/