Jump to content
Walts2581

Help with dizzy wiring!

Recommended Posts

G'day all,

 

Been lurking here a while but now I think ive found a problem someone already hasn't answered!

 

I'm trying to put a 1990 XF ute back together and hit a hurdle with the dizzy.  It's the unleaded carby est one.  When it's been stripped down, the wires have been pulled out of the three pin plug connecting to the module on the dizzy, and I cant for the life of me find what the correct pinout order is to put the plug back together.

 

Three wires are yellow/green, brown and black/orange(maybe pink?)

 

Can anyone assist or send me a photo of how the wiring is on their bus.

 

Cheers

 

Share this post


Link to post
Share on other sites

Ground is Black/Orange.

Pin 1 on Dizzy.

Hall effects ground.

 

Supply is Brown.

Pin 3 on Dizzy.

Hall effects Power

 

Signal is Yellow/Green.

Pin 5 on Dizzy.

PIP signal from dizzy to ecu.

 

Here's a pic of connector set up.....

e47b83d7a9ce7942667f6a935f56ce64.jpg

 

Sent from my S21 using Tapatalk

 

 

 

 

Share this post


Link to post
Share on other sites
Absolute bloody legend, much appreciated. Is that a workshop manual jack?  I've got a copy of the Gregory's manual and it's got very little detail.

Yeah mate, its the Ford workshop manual for XF. My pleasure.

But actually it's a Nissan workshop manual for the XFN Nissan ute which was a rebadged Ford XF.

But it's the only available way to get a proper XF workshop manual for Ute's.

Most of the stuff for sedans is the same.

 

25478d0fece31b52eaef39d0e8b3b301.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×