Jump to content
Server maintenance Read more... ×
CHESTNUTXE

CLEVELAND AIR CLEANERS

Recommended Posts

Lately i have had this urge for v8 air cleaners ,mainly to start a wall of lids with new and interesting usa stickers 460,429,ect,anyway today i scored a stash of xd xe clevo lids n bases and there is some differences between models lets investigate these first.3fHJvrlg_o.jpg

Share this post


Link to post
Share on other sites

next is my usa 400 air cleaner ,the base is similar to our xa xb xc but the lid is sunk around the centre bolt which is great for my xf bonnet clearance about 1cm deeper than the one i used when getting my modplate which was xd lid,it also did not fit as snug as the matching 400 lid.InTh5tWw_o.jpg9ety46gR_o.jpg

Share this post


Link to post
Share on other sites
Jeez that snorkel runs close to the positive terminal on the battery.
Yeah its a big air cleaner for big usa engine bays i cant move it cause the breather fits where it sits

Sent from my SM-G570Y using Tapatalk

Share this post


Link to post
Share on other sites
Yeah its a big air cleaner for big usa engine bays i cant move it cause the breather fits where it sits

Sent from my SM-G570Y using Tapatalk

I have been waiting for this sticker for about a month gerg will love it 460 police interceptor sic4365d4d5147092707bfb248f20f445f3.jpg218e79dacd6d4c3abebd1c7a51ab06dd.jpg34ab622b00dbc7b232f1429823bfb42d.jpge234f1b02f55de470285f118fa55bab4.jpg

Sent from my SM-G570Y using Tapatalk

Share this post


Link to post
Share on other sites
Faker 400

Sent from my SM-G570Y using Tapatalk

While still hungover thismorn im staring at my lids and notice something weird both are xd xe silver 4.9 lids and 1 is fatter on the lip edge ? Never seen that b4 74dd70e203bb629cb0b75a4dce5a8414.jpg

Sent from my SM-G570Y using Tapatalk

Share this post


Link to post
Share on other sites
While still hungover thismorn im staring at my lids and notice something weird both are xd xe silver 4.9 lids and 1 is fatter on the lip edge ? Never seen that b4 74dd70e203bb629cb0b75a4dce5a8414.jpg

Sent from my SM-G570Y using Tapatalk

Look the same from topc5fc5d9c6406d0c0a31af08ab8709221.jpg

Sent from my SM-G570Y using Tapatalk

Share this post


Link to post
Share on other sites
FoMoCo being cheap-arse as usual, and trying to save money on steel....
Hey gerg i watched a show on the space shuttle and it reaches 1700 deg on re entry that should be ample to clean up the lid as ya frizbie the fkr back to earth

Sent from my SM-G570Y using Tapatalk

Share this post


Link to post
Share on other sites
Hey gerg i watched a show on the space shuttle and it reaches 1700 deg on re entry that should be ample to clean up the lid as ya frizbie the fkr back to earth

Sent from my SM-G570Y using Tapatalk

That's now the Action Man's brand new patented stripping process... Bit expensive but whatever

Sent from my CPH1920 using Tapatalk

Share this post


Link to post
Share on other sites
That square hole is for a plastic clip, which holds the vacuum lines running to the valve.
 
edit - gerg beat me to it... I concur with the above.
Well there ya go we are all square

Sent from my SM-G570Y using Tapatalk

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×