Michelle .mansueto 0 Posted May 28, 2020 Hi, I have a 2010 g6e auto turbo. When I change the gear to sports mode, it dosent do anything. Checked fuses. All is fine. Can someone help. Share this post Link to post Share on other sites
gerg 10,871 Posted May 28, 2020 Possibly could have some dirt or something spilled down into the shifter, which relies on switches triggered by the shift lever to tell the computer when to shift up or down. I saw lots of crap build up in there when we had BA-BF Falcons.Sent from my CPH1903 using Tapatalk Share this post Link to post Share on other sites
Michelle .mansueto 0 Posted May 28, 2020 Thanks. I'll have a look at it. Is there an easy way to get to the shifter as it looked pretty clean. Share this post Link to post Share on other sites
gerg 10,871 Posted May 30, 2020 I haven't touched an FG but BA - BF shifter surrounds just unclip with a bit of persuasion. Maybe a butter knife to lever up an edge or something similar. That's only if FGs are built like this as wellSent from my CPH1607 using Tapatalk Share this post Link to post Share on other sites
Mr Polson 10,214 Posted May 30, 2020 FGs have a very different shifter setup to BA/BF, none of the shifter channel is exposed if that makes sense. 1 gerg reacted to this Share this post Link to post Share on other sites
Michelle .mansueto 0 Posted May 30, 2020 Yeah...still haven't sorted the situation out yet. Share this post Link to post Share on other sites
gerg 10,871 Posted May 30, 2020 FGs have a very different shifter setup to BA/BF, none of the shifter channel is exposed if that makes sense.OK it has a boot like a manual stick? Sent from my CPH1607 using Tapatalk Share this post Link to post Share on other sites
Mr Polson 10,214 Posted May 30, 2020 OK it has a boot like a manual stick? Sent from my CPH1607 using TapatalkYeah, like a manual. 1 gerg reacted to this Share this post Link to post Share on other sites