NZXD 2,328 Posted January 28, 2020 Gents, does anybody have any experience with blow through carbs, either ones they have converted or purchased new? Just throwing around some shed ideas for the XD and thinking about a side mount blower. Sent from my iPhone using Tapatalk 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
Kiwi-E 731 Posted January 28, 2020 Following this. I'll be in a similar boat when i get back onto the crossy +T project.... (hopefully later this year)As far as i got was pricing up a quick fuel 650 blow thru. At around $1,400 NZD it wasnt cheap....... from what I've read so far you can modift a holley for a fraction of the price..... no idea on how a well modified carb performs compared to the quick fuel..... how easily tuned etc?Sent from my SM-G920I using Tapatalk Share this post Link to post Share on other sites
NZXD 2,328 Posted January 28, 2020 Following this. I'll be in a similar boat when i get back onto the crossy +T project.... (hopefully later this year)As far as i got was pricing up a quick fuel 650 blow thru. At around $1,400 NZD it wasnt cheap....... from what I've read so far you can modift a holley for a fraction of the price..... no idea on how a well modified carb performs compared to the quick fuel..... how easily tuned etc?Sent from my SM-G920I using TapatalkYeah mate looking around the same price here for a new one specifically set up for boost. I’ve read most of the conversions threads on how to convert your NA carb to blow through, from no power valves and large jets to low vac power valves and better afr with cruising off boost, seems a little hit n miss with results. The other option is Holley sniper / Fitech. Sent from my iPhone using Tapatalk 1 deankxf reacted to this Share this post Link to post Share on other sites
slydog 7,873 Posted January 30, 2020 You can buy boost referenced metering blocks for carbs. Share this post Link to post Share on other sites
NZXD 2,328 Posted February 4, 2020 You can buy boost referenced metering blocks for carbs. I’ve tried searching for them but can’t seem to find it, any links or companies on line? Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Boingk 862 Posted February 4, 2020 Here ya go, take your pick: Set up for methanol: https://www.ebay.com.au/itm/Holley-Blow-Through-Carburetor/233464078097?hash=item365b8b1f11:g:OV8AAOSwQOxdWydk AED 750DP: https://www.ebay.com.au/itm/AED-750HO-BT-Blow-Thru-Holley-Double-Pumper-Carb-Turbo-Supercharger-Through-750/332009777021?epid=593798997&hash=item4d4d53277d:g:1FYAAOSw44BYCmo1 1 NZXD reacted to this Share this post Link to post Share on other sites
scottly 475 Posted February 4, 2020 Have you thought about a Holley super sniper efi system? They are around $2000 you can run a turbo or supercharger or nitrous, they self tune they can control ignition timing and they have a shit load of other features. Share this post Link to post Share on other sites
NZXD 2,328 Posted February 4, 2020 Have you thought about a Holley super sniper efi system? They are around $2000 you can run a turbo or supercharger or nitrous, they self tune they can control ignition timing and they have a shit load of other features. Thought they were more expensive than that, not too much more than a new blow through carb really. Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
scottly 475 Posted February 4, 2020 Yeah they are bloody cheap for what they can do, I’m currently Converting my Clevo to efi with boost and I have gone this path. 1 NZXD reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted February 4, 2020 Yeah they are bloody cheap for what they can do, I’m currently Converting my Clevo to efi with boost and I have gone this path.I’ll have to read up on your build. I’m heading towards a torque storm blower. Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
scottly 475 Posted February 5, 2020 I’ll have to post some pictures soon lol I looked into the centrifugal supercharger side of things and f!$k me they are expensive to get set up and running. That why I went the turbo path, but each to their own. 1 NZXD reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted February 5, 2020 I’ll have to post some pictures soon lol I looked into the centrifugal supercharger side of things and f!$k me they are expensive to get set up and running. That why I went the turbo path, but each to their own.Yeah they aren’t cheap here at $5900 for the torqstorm setup, however it is bolt in. A turbo setup wouldn’t be cheap for me as I can’t weld and there is no off the shelf (decent quality) turbo manifolds that will work for a Windsor in an XD, there is a stainless kit for a single turbo out of the US to suit a 67 Windsor mustang that could work. Looked into the Holley Super Sniper 650, $2200 and it can control timing, so by the time you buy a boost referenced carb and MSD ignition box you aren’t too far from that. What are you using for a fuel system?Sent from my iPhone using Tapatalk 1 scottly reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted February 5, 2020 https://www.cxracing.com/MF-KIT-MSTG67-289-VCLMThis is the CX racing brand turbo manifold kit to suit 64-68 mustang with Windsor and c4. Sent from my iPhone using Tapatalk 1 Boingk reacted to this Share this post Link to post Share on other sites
Boingk 862 Posted February 5, 2020 Nice one, thats actually pretty reasonably priced! 1 NZXD reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted February 5, 2020 Nice one, thats actually pretty reasonably priced!Given the engine bay sizing similarities between the early mustang and the XD, the kit should work. The only issue could be the steering box on the XD being in the way. Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Boingk 862 Posted February 5, 2020 Down the line I'll probably do it you know... mind you I'd go to an aftermarket block from Dart, or something like that. Share this post Link to post Share on other sites
NZXD 2,328 Posted February 5, 2020 8 psi and I’d be around 525 - 550hp mark which is regarded as being the limit of the factory block, some have been successful in more and holding together, but that is also the limit of my trans etc. Dart block and get serious with it haha. Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
scottly 475 Posted February 6, 2020 19 hours ago, NZXD said: Yeah they aren’t cheap here at $5900 for the torqstorm setup, however it is bolt in. A turbo setup wouldn’t be cheap for me as I can’t weld and there is no off the shelf (decent quality) turbo manifolds that will work for a Windsor in an XD, there is a stainless kit for a single turbo out of the US to suit a 67 Windsor mustang that could work. Looked into the Holley Super Sniper 650, $2200 and it can control timing, so by the time you buy a boost referenced carb and MSD ignition box you aren’t too far from that. What are you using for a fuel system? Sent from my iPhone using Tapatalk I purchased mine from vpw for $2050. I am going a rear mount turbo less heat and mess in the engine bay, I can use the headers I already have and I don’t have to run a intercooler. i am running a single Holley fuel pump, 2 fuel filters and a regulator, the factory tank is removed I just need to buy a my fuel cell now. What do you get in that kit mate? Can you run power steering? Write down a full parts list of every thing you need man I will scare you. 1 NZXD reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted February 6, 2020 I purchased mine from vpw for $2050. I am going a rear mount turbo less heat and mess in the engine bay, I can use the headers I already have and I don’t have to run a intercooler. i am running a single Holley fuel pump, 2 fuel filters and a regulator, the factory tank is removed I just need to buy a my fuel cell now. What do you get in that kit mate? Can you run power steering? Write down a full parts list of every thing you need man I will scare you. Kit comes with manifolds, crossover goes back off C4 bell housing and turbo sits where our battery is in the X series. Also comes with 3 inch exhaust down pipe which finishes down by the trans cross member. This suits 64-68 mustang with SBF. Can’t see an issue fitting it in the XD apart from the steering box maybe??? Parts list:Manifold kitTurbo T4 (.96 ar hot side)Holley Super SniperElectric fuel pump and return lines1:1 rising rate FPRCarb hat and cold side piping - intercooler (already have that)Blow off valveExhaust modsUpgrade alternator (still run 55 amp)Oil feed and return for turbo - modify sumpAll this is cheaper than the Torqstorm at $5900. What am I missing? Sent from my iPhone using Tapatalk 2 Boingk and scottly reacted to this Share this post Link to post Share on other sites
Boingk 862 Posted February 6, 2020 Jam an ebay 3582 on it and you'll be laughing. Seriously, those 7-year-olds in China have really upped their turbo fab game. $500 for a turbo, inercooler, pipes and joiners!? https://www.ebay.com.au/itm/GT3582-Turbo-For-Ford-Falcon-BA-BF-XR6-FPV-F6-64mm-Pipe-Kits-Intercooler-76/273182478273?hash=item3f9af1cfc1:g:gaEAAOSwT6Va41xP 1 NZXD reacted to this Share this post Link to post Share on other sites
NZXD 2,328 Posted February 6, 2020 I purchased mine from vpw for $2050. I am going a rear mount turbo less heat and mess in the engine bay, I can use the headers I already have and I don’t have to run a intercooler. i am running a single Holley fuel pump, 2 fuel filters and a regulator, the factory tank is removed I just need to buy a my fuel cell now. What do you get in that kit mate? Can you run power steering? Write down a full parts list of every thing you need man I will scare you. Any more details on the rear mount setup? Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
scottly 475 Posted February 8, 2020 On 2/6/2020 at 9:50 PM, NZXD said: Kit comes with manifolds, crossover goes back off C4 bell housing and turbo sits where our battery is in the X series. Also comes with 3 inch exhaust down pipe which finishes down by the trans cross member. This suits 64-68 mustang with SBF. Can’t see an issue fitting it in the XD apart from the steering box maybe??? Parts list: Manifold kit Turbo T4 (.96 ar hot side) Holley Super Sniper Electric fuel pump and return lines 1:1 rising rate FPR Carb hat and cold side piping - intercooler (already have that) Blow off valve Exhaust mods Upgrade alternator (still run 55 amp) Oil feed and return for turbo - modify sump All this is cheaper than the Torqstorm at $5900. What am I missing? Sent from my iPhone using Tapatalk You will need a also wastegate I’m sure there will be other small items Share this post Link to post Share on other sites
scottly 475 Posted February 8, 2020 On 2/7/2020 at 9:30 AM, NZXD said: Any more details on the rear mount setup? Sent from my iPhone using Tapatalk I am probably a month And a half or so from Mine being finished. Jump on YouTube man and check out some rear mount turbo cars there are awesome. I think there is a well known brown Torana that’s a street car with the rear mount set up, it’s bloody cool and it’s very quick from memory 1 NZXD reacted to this Share this post Link to post Share on other sites