Todd 13 Posted October 6, 2019 Have pulled heater box out can’t find anything online that’s looks anywhere close to what I have pulled out ,most Xw-xy heater boxes online are a complete big square box mine is more off a cylinder funnel box with a short hose connecting to a letter box looking unit with a 45’ angle at one end . The heater core outlet pipe coming out through firewall has broken off and cannot find a way to remove core due to flap door hinge there doesn’t seem any way off removing flap door hinge rod with out destroying it so I can’t remove core to re core it any advice would be great. Maybe a radiator specialist have a way around this Share this post Link to post Share on other sites
deankxf 20,266 Posted October 6, 2019 i wonder if the angle was soldered on after it was inside the heater box? if so, then yes you'll need a radiator mob or skills to do it. hard to know without pics, i haven't seen one for more than 10yrs Share this post Link to post Share on other sites
Todd 13 Posted October 7, 2019 Hi dean ended up working it out had to stretch the heater box walls to release door hinge pin . 2 deankxf and gerg reacted to this Share this post Link to post Share on other sites
deankxf 20,266 Posted October 7, 2019 awesome, cant imagine it without a photo, but glad you got it sorted without issues Share this post Link to post Share on other sites
Todd 13 Posted October 8, 2019 I did try to upload photo couldn’t work out how Share this post Link to post Share on other sites
deankxf 20,266 Posted October 8, 2019 1 hour ago, Todd said: I did try to upload photo couldn’t work out how easiest way is with the tapatalk app straight from the phone.. i haven't tried it, i use imgur.com host it on there, and link it here in the text Share this post Link to post Share on other sites
Todd 13 Posted October 14, 2019 Hi dean this is that the xw heater box I posted about and doesn’t seem to have blower fan,maybe it missing or it just runs using airflow Sent from my iPhone using Tapatalk 1 deankxf reacted to this Share this post Link to post Share on other sites
bear351c 10,270 Posted October 14, 2019 Wow........! Share this post Link to post Share on other sites
bear351c 10,270 Posted October 14, 2019 This is an Xdub heater box........ Share this post Link to post Share on other sites
deankxf 20,266 Posted October 14, 2019 12 hours ago, Todd said: Hi dean this is that the xw heater box I posted about and doesn’t seem to have blower fan,maybe it missing or it just runs using airflow Sent from my iPhone using Tapatalk wonder if that's aftermarket, someone's bodged one on from something else. haven't seen anything like that before, but haven't really worked on PRE XA though 1 OLM8 reacted to this Share this post Link to post Share on other sites
OLM8 83 Posted October 15, 2019 Hi all this might helpThere were two types of heater boxes for the XY.The one without the fan is commonly called a blow through heater it had a heater water core, but no fanand obviously no fan speed switch see the pic of my carIt also came with the no fan , “heater delete” factory pov pack option. Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
OLM8 83 Posted October 15, 2019 My car however at some stage had a really old Smiths Beehive heater with fan , fitted to the car, probably because the original heater core leaked which was very common. It works great and is toasty warm it’s still got the old bakerlite hi/low switch. Cheers Sent from my iPhone using Tapatalk 2 deankxf and 2redrovers reacted to this Share this post Link to post Share on other sites
deankxf 20,266 Posted October 15, 2019 learning stuff all the time. COOL(or warm, with heater turned on) 2 OLM8 and 2redrovers reacted to this Share this post Link to post Share on other sites
OLM8 83 Posted October 15, 2019 Maybe the only XY POV packs like mine and other early XY’s got the blow through heater from the XW? or even the XT?Most of them got the big box that you would normally think of for a xy heater.I’m no expert.Sent from my iPhone using Tapatalk 1 deankxf reacted to this Share this post Link to post Share on other sites
bear351c 10,270 Posted October 15, 2019 Cool. Learning every day, thanks for that. 2 OLM8 and deankxf reacted to this Share this post Link to post Share on other sites
Todd 13 Posted October 16, 2019 Like to thanks everyone’s input and olm8 for photo’s 1 OLM8 reacted to this Share this post Link to post Share on other sites
OLM8 83 Posted October 16, 2019 You’re welcome ,I’m no expert , all just information I picked up, when I gave my rig a tidy getting it back on the road.Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites