Jump to content
Aussieyobbo16

Starting issues.

Recommended Posts

Hi there. Can anyone tell me where the ignition relays for the gas are normally located on an xg ute. I’ve had trouble getting it started and have been led to believe that there’s an issue with the wiring between the standard fuel system and the gas. Tia

Share this post


Link to post
Share on other sites

could be anywhere, but on mine it had one near the brake booster ( take a photo of the area) and one on the inlet manifold cutting power to the idle control solenoid on gas. 
what's it actually doing,, or not doing? 
what gas system is on it? does it start on petrol then switch to gas(if so, it needs to run on petrol... sometimes the fuel pump stops and therefore it wont start on gas)

Share this post


Link to post
Share on other sites

It doesn’t run on either fuel. On both fuels it turns over and sparks but it’s not getting fuel. I’ve just now discovered that the control unit for the gas has been removed the a previous owner.  

Share this post


Link to post
Share on other sites

what do you mean by control unit? the guage/switch.. it wont work on petrol without the wires hooked up there that need to switch the injector relay on(that's my guess anyway)

cant tell really by description

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×