Valvebouncer 2,389 Posted July 24, 2018 those valve seats and valves!!! Imagine if you didn’t remove the valves and slapped the head on, all that rust and scale would have gone straight into the engine and destroy it. Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted July 24, 2018 can see the pitting in the valve seats from sitting for ages.. (remembers the drop in and run description..) My gemini head from the 20yr old barn storage ran ok, but the head dude is going to re cut all the seats and valves, did old mate say how bad yours were?First lil clean up sees the seats are well umm ok for a cheap rebuild but after i lap them it should be passable sometimes i wonder wtf am i even doing this for but i enjoy itSent from my SM-G570Y using Tapatalk Share this post Link to post Share on other sites
deankxf 20,231 Posted July 24, 2018 Sounds good. Yeah hardened valve seat probably don't rust much 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted July 25, 2018 Sounds good. Yeah hardened valve seat probably don't rust much I lapped the valves and another clean now spring assembly Sent from my SM-G570Y using Tapatalk Share this post Link to post Share on other sites
Valvebouncer 2,389 Posted July 25, 2018 How do the exhaust seats look? 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted July 25, 2018 Not too bad vb anyway i showed rose how to put the locks in and she did it now lets clean the surfurces one more time and put head onHow do the exhaust seats look?Sent from my SM-G570Y using Tapatalk 1 Valvebouncer reacted to this Share this post Link to post Share on other sites
Valvebouncer 2,389 Posted July 25, 2018 Any lapping and cleaning up of the valves and seats will be better than in was before, good job. 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted July 25, 2018 Any lapping and cleaning up of the valves and seats will be better than in was before, good job.Starting to look betterSent from my SM-G570Y using Tapatalk 4 77xcfalcon, deankxf, bear351c and 1 other reacted to this Share this post Link to post Share on other sites
77xcfalcon 177 Posted July 25, 2018 I think I need one of those heat shields. Looks greatSent from my iPad using Tapatalk 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted July 25, 2018 yeah real cool 80.s stuff and rocker cover too ol m8 is gunna blast it so i can match it up. Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted July 28, 2018 yeah real cool 80.s stuff and rocker cover too ol m8 is gunna blast it so i can match it up.I cant finish the motor off untill ol m8 has cleaned the sump and rocker cover so Sent from my SM-G570Y using Tapatalk 1 deankxf reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted August 2, 2018 I cant finish the motor off untill ol m8 has cleaned the sump and rocker cover so Sent from my SM-G570Y using TapatalkI got the sump n rocker cover back but its a bit pitted on 1 end but still usable i will re coat it with silverSent from my SM-G570Y using Tapatalk Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted August 2, 2018 Ok its all done and looks good lets put her up for sale all the other motors ive done sold first listing I got the sump n rocker cover back but its a bit pitted on 1 end but still usable i will re coat it with silverSent from my SM-G570Y using TapatalkSent from my SM-G570Y using Tapatalk 4 Valvebouncer, matt_lamb_160, Ando81 and 1 other reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted August 17, 2018 THE CROSSY IS SOLD,LOOKS LIKE GOING IN A WORN OUT 3.3 XE,LETS FIND ANOTHER ! 2 77xcfalcon and deankxf reacted to this Share this post Link to post Share on other sites
jca25 1,034 Posted August 17, 2018 THE CROSSY IS SOLD,LOOKS LIKE GOING IN A WORN OUT 3.3 XE,LETS FIND ANOTHER !Are u after another motor chestnutxe Sent from my SM-G950F using Tapatalk Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted August 17, 2018 always mate,wok ya got ? Share this post Link to post Share on other sites
SPArKy_Dave 8,828 Posted August 17, 2018 Action Man strikes again, nice job! How much did it sell for? What's the date code on the block? It's that other small number - further along from the 84DA number. Share this post Link to post Share on other sites
jca25 1,034 Posted August 17, 2018 200 crossy was out of a xf we were going to use for a racecar but changed wat car we were going with to a au Sent from my SM-G950F using Tapatalk 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted August 17, 2018 $990 guy in brizzy comin in the morning to pick it up,now i can buy that late model efi 302 w roller at the wreckers Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted August 17, 2018 where are you located Share this post Link to post Share on other sites
jca25 1,034 Posted August 17, 2018 Bundaberg it's been pulled down and is std bore all have a 4 speed to go with it Sent from my SM-G950F using Tapatalk Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted August 17, 2018 im on the southern end of the gold coast,its a bit far mate but thanks anyway. Share this post Link to post Share on other sites
jca25 1,034 Posted August 17, 2018 Mate that owns it has a removalist company I'm sure he could drop off if u are keen Sent from my SM-G950F using Tapatalk 3 SPArKy_Dave, CHESTNUTXE and Valvebouncer reacted to this Share this post Link to post Share on other sites
CHESTNUTXE 7,260 Posted August 18, 2018 The bloke picked it up and was stoked its going in a xc actually. 1 Crazy2287 reacted to this Share this post Link to post Share on other sites
vanJack 43 Posted September 8, 2018 That Stag paste was around when I was a kid.. my dad used it for plumbing jobs on the farm.. never forget the smell.. Also, I now know what lapping valves is.. never saw it done before.. Share this post Link to post Share on other sites