``` 54 Posted February 14, 2018 Could someone tell what are the correct bolts that hold the inspection plate on to the bell housing on a cleveland 302 and c4 trans please? Don't want to get the wrong ones and fuck up the threads! Share this post Link to post Share on other sites
bear351c 10,260 Posted February 14, 2018 Think they're 1/4" UNC. About 3/4" inch long. Try a rocker cover bolt, (same) Definitely UNC. Share this post Link to post Share on other sites
``` 54 Posted February 14, 2018 I have a new set of rocker cover bolts..will give one a try. Share this post Link to post Share on other sites
``` 54 Posted February 14, 2018 1 hour ago, bear351c said: Think they're 1/4" UNC. About 3/4" inch long. Try a rocker cover bolt, (same) Definitely UNC. ok..just tried the rocker cover bolts and they just pushed in so are too small Share this post Link to post Share on other sites
``` 54 Posted February 14, 2018 I have a few different ones kicking around spare so will grab some and give them a try. I think one of the starter motor bolts also holds the inspection plate on so might remove that and try it in the holes (ooer!) Share this post Link to post Share on other sites