Spacers n studs

[dex 2,065]

Im wanting to space my rear rims out a tad more ,, get rid of the sucked in arse look somewhat.

i already have 5 mm spacers on there ,wich will be removed ,,, and i have a full set of these allready on the car ,,,,mag nuts with the " extra turn " shaft/thread section . 

https://m.ebay.com.au/itm/SHAKE-FREE-1-2-Inch-EXTRA-TURN-Chrome-Wheel-Nut-FORD-FAIRLANE-ZK-20-pieces-/272844341857?hash=item3f86ca4261%3Ag%3A7ZMAAOSw~uhUnMej&_trkparms=pageci%3A98abcb14-ae33-11e7-ba76-74dbd180491d%7Cparentrq%3A0975afdd15f0aa4938a6088efffcb895%7Ciid%3A17

Wanting to go up to 8 or 10 mm further out using these spacers , to get the rim and tyre as close to the guard as possible. 

http://www.ebay.com.au/itm/Wheel-Spacers-Aluminium-8mm-Ford-Nissan-EVO-Honda-5-Stud-114-3mm-PCD-/142530260954?hash=item212f772fda:g:zp4AAOSw4A5YtxaF

now ,, will these studs in the mid length , be suitable ,? 

http://www.ebay.com.au/itm/Ford-Falcon-Wheel-Studs-XR-XT-XW-XY-XA-XB-XC-XD-XE-XF-EL-ALL-MODELS-ABC-/261709310077?hash=item3cef17287d:m:m9JJ9_jB5oLyijWN2VpmcNg

cheers 

[dex 2,065]

Anyone ,,?