xwroo 348 Posted January 4, 2017 So I bit the bullet and ended up buying a 9" diff. What do I need to change over for the swap tailshaft, uni, u-bolts etc etc??? Sent from my iPhone using Tapatalk 1 MNTL.XD reacted to this Share this post Link to post Share on other sites
MNTL.XD 3,831 Posted January 5, 2017 I just put a 9" in my XD, i had to change the uni which was a cross breed bloody thing, 1/2 borgy 1/2 9". I can find the part number for you if needed. I also had to change the diff to chassis rubber brake line. One was at 90° and one was at 45° to the diff. I also had to buy new brake lines, the breather tube on my diff was in a different spot to the barg warner so the lines were different lengths, if your diff came with brake lines you might be ok. Is it a disc brake diff or drum? Does it have mounts for the handbrake cable or are they on your leaf spring mounts? Edit** U bolts were interchangeable. 1 xwroo reacted to this Share this post Link to post Share on other sites
xwroo 348 Posted January 5, 2017 I just put a 9" in my XD, i had to change the uni which was a cross breed bloody thing, 1/2 borgy 1/2 9". I can find the part number for you if needed. I also had to change the diff to chassis rubber brake line. One was at 90° and one was at 45° to the diff. I also had to buy new brake lines, the breather tube on my diff was in a different spot to the barg warner so the lines were different lengths, if your diff came with brake lines you might be ok. Is it a disc brake diff or drum? Does it have mounts for the handbrake cable or are they on your leaf spring mounts? Edit** U bolts were interchangeable. I've just brought a bare housing with axles. No brake lines nothing like that, so just starting from scratch. Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites