Jump to content
XFH00N

F100 LWB 250turbo

Recommended Posts

Well last year in December i got a F100 without motor or box for free so that became my newest project. It has a 3.50:1 lsd 9in in it and i am building up a 250xflow with a blow thru carby and a turbo which will be backed up with a T5. Well here are some pics of the work done so far.

 

12310620_10153750720866585_6353604585650

 

When I got it

 

12341555_10153750720976585_3338927347128

 

 

12341414_10153761996466585_5028093005801

Stripping

 

993861_10153803974551585_604835352390686

 

12549116_10153846277361585_6328378989600

 

12552961_10153855202176585_2490709841633

Tray I picked up cheap

 

12494687_10153855202216585_1521075605799

 

The damage

 

12418091_10153855202261585_1019032763978

 

12642530_10153892392506585_1305126004742

 

12646968_10153892392546585_8582186603777

 

The fun

 

1622232_10154011477161585_84748117480043

 

12924556_10154069682236585_2910721865905

 

12920519_10154071881781585_1183403935379

 

12923309_10154074034181585_1070577403362

 

13061969_10154125615976585_7751017265573

 

13087528_10154125616031585_5649631577388

 

13124838_10154130527556585_6585025657228

 

13082539_10154132991966585_5057881351581

 

13516630_10154257994491585_7957324190177

 

As it sits the bottom end of the motor is nearly ready to go in with the gearbox. Cab has been stripped and is ready for paint doors and guards are stripped, rust free and in primer and tray is 95%repaired just need to weld it out. Have also done a diff flip and painted the enginebay and chassis

 

Share this post


Link to post
Share on other sites

pistons are 22cc and cam specs

 

 

Adv Dur           Dur @ .050"               LSA       Valve Lift

286/288          226/230                   113         .541"/.536"

 

Share this post


Link to post
Share on other sites

been watching this build on ffau, making decent progress considering what you started with

Cheers mate there has been some work on this harder then my previous cars ive done.

 

New main bearings and cam bearings should turn up this week aswell as my cam and lifters(From Camtech) Which should see the bottom end put together then I can fit the flywheel, clutch and gearbox then I plan on fitting the bottom end and box into the truck so I can start sorting out the dump pipe and exhaust slowly

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×