CHESTNUTXE 7,260 Posted January 24, 2018 ok seems easy enough thanks dean 1 deankxf reacted to this Share this post Link to post Share on other sites
Mr Polson 10,214 Posted January 24, 2018 Can be done in car - I done mine out of car as I swapped from column manual to floor shift anyway.Just make sure you get the steering coupling dead flat.Sent from my Pixel using Tapatalk 2 deankxf and CHESTNUTXE reacted to this Share this post Link to post Share on other sites
judgetread 754 Posted January 25, 2018 On 1/24/2018 at 9:20 AM, CHESTNUTXE said: how hard is it to tap the p/s colum down to fit non p/s like does the colom need to come out ? or can it be done still bolted to the car ? You mean to get the center of the steering column shaft down from a p/s to non-p/s one? I did it, removed the box, put a slide hammer on the end of it and gave it a few good pulls came out pretty easy. No need to unbolt anything if I recall. 1 CHESTNUTXE reacted to this Share this post Link to post Share on other sites