Demmo 295 Posted February 13, 2016 Ok need some help/advise just put a hole in me sump in the xh 4 litre (i know dumb arse) what is the best way to replace it does the motor need to come out or can the sump be removed whilst in situ good advise will be greatfully accepted thanks demmo Share this post Link to post Share on other sites
Thom 6,642 Posted February 13, 2016 You need to pull the engine to change it Share this post Link to post Share on other sites
Campo 869 Posted February 13, 2016 Engine out or k frame out. Both are a shit job haha Share this post Link to post Share on other sites
xm-221 1,803 Posted February 14, 2016 Can be done lifting the engine off the mounts and dropping the gearbox crossmember. Only advisable if you've got Chinese hands and slender fingers. 1 MNTL.XD reacted to this Share this post Link to post Share on other sites
Demmo 295 Posted February 14, 2016 Thanks for the reply people looks like its gonna be off the road for awhile need to save some dollars to do a motor rebuild as it has done 400thou and was getting like me a little tired Thanks demmo Share this post Link to post Share on other sites
Outback Jack 6,352 Posted February 14, 2016 You didn't put the sump guard back on did ya? How the fark you manage to hole the sump? Lol Been bush bashin in the Outback? I dunno, these ol blokes... hooning around and carrying on...... sheesh.... =) Jack. Sent from my GT-S7583T using Tapatalk Share this post Link to post Share on other sites