steveheffo 1 Posted December 30, 2015 Hello everybody I want to upgrade my brakes in my series 1 ute to a series 2 with the full abs system just want to know do I need the brake booster utc where the pedal is connected I am changing the wiring harness to the series 2 as I have installed a fairmont dash etc. Also given that the fairmont sedans have traction control what happens about that in a ute I am just a little bit lost about that . I have changed all the mechanical parts in the front end to the series 2but I think I need the abs system so the computer understands what is going on ..... Thanks for any advice !!!!!! Happy new year Regards Steve Share this post Link to post Share on other sites
Nath 1,975 Posted December 31, 2015 - AU II Calipers + Brake Pads + AU II Rotors- AU II Sway Bar and Sway Bar Mounts + links- AU II Stub Axles- AU II Lower Control Arms Not sure about the ABS/Electrics side of things though... 1 MNTL.XD reacted to this Share this post Link to post Share on other sites
Defective 1,692 Posted December 31, 2015 The last thing you want is au traction control.... It's about as subtle as a brick in the face... 1 Nath reacted to this Share this post Link to post Share on other sites
Nath 1,975 Posted December 31, 2015 The last thing you want is au traction control.... It's about as subtle as a brick in the face... Best traction control system I've seen is the good old right foot. Share this post Link to post Share on other sites
steveheffo 1 Posted December 31, 2015 Hi mate thanks for that I wasn't to concerned about the traction control I was just concerned if the comutuer didnt find it things may not work thats all .... any thoughts Have a good new year Steve Share this post Link to post Share on other sites