XFGHIA747 76 Posted July 30, 2015 So guys as the title says how much clearence is there with the barra in a xf or do i need a xg one if xg wont work ill have to get a custom one, was going to angle the sump but its just easier to mod the swaybar, i would prefer not to make up spacers for under the swaybar mount just need a rough guide how much room there is as want it right for when motor goes in as wont be coming back out.. Cheers Share this post Link to post Share on other sites
Campo 869 Posted August 1, 2015 Hey mate I bent a XG swaybar to fit. It's close but does have clearance. Had to play around with it to get the bends in the right spot to bring it further forward. Either that or get one custom made. Share this post Link to post Share on other sites
Campo 869 Posted August 1, 2015 You've got no hope of a XF one fitting, you have to space them down about 40mm hahah Share this post Link to post Share on other sites
deankxf 20,231 Posted June 20, 2019 4 minutes ago, jimeoin351 said: Use XG bar. you can buy one's that work now XG still not a direct fit http://musclegarage.com.au/index.php?route=product/product&product_id=244 Share this post Link to post Share on other sites
jimeoin351 1 Posted June 20, 2019 Soz, it was my understanding that it was. Must need to chop that bit off your sump still and plate it up. Share this post Link to post Share on other sites
jimeoin351 1 Posted June 21, 2019 Google 'Making your own sway bar' or get on a Facey forum page. Share this post Link to post Share on other sites