bear351c 10,260 Posted August 10, 2015 What brand roller rockers fit under the standard clevo covers.?? Share this post Link to post Share on other sites
Thom 6,639 Posted August 10, 2015 What brand roller rockers fit under the standard clevo covers.?? most do unless you are running a girdle but lott's are yella terra bolt on adjustables 1 bear351c reacted to this Share this post Link to post Share on other sites
bear351c 10,260 Posted August 10, 2015 Cheers Thom. Something else i dont need to buy....... might just stick with the "Power by Ford" jobbies. 1 Thom reacted to this Share this post Link to post Share on other sites
Lott 35 Posted August 17, 2015 It goes real hard now. I have a few issues I have to rectify, engine run on, not getting full throttle, and no kick down link for the auto. Feels like its running out of air or fuel up top revs, might have to try it with a different air filter. Share this post Link to post Share on other sites
bear351c 10,260 Posted August 18, 2015 Fuel filters, maybe. Share this post Link to post Share on other sites
Lott 35 Posted August 18, 2015 New bracket for spedo cable, now get full throttle. Flipped the lid on air filter still stumbles up high. Must be fuel. I only have the standard mech fuel pump. So next investment fuel pump, reg and lines. Any recomedations. 1 MNTL.XD reacted to this Share this post Link to post Share on other sites
Thom 6,639 Posted August 18, 2015 Send me a message or call tomorrow 1 Trev Vaa reacted to this Share this post Link to post Share on other sites
Trev Vaa 1,185 Posted August 19, 2015 It goes real hard now. I have a few issues I have to rectify, engine run on, not getting full throttle, and no kick down link for the auto. Feels like its running out of air or fuel up top revs, might have to try it with a different air filter. sounds like either too much timing or its running lean. what size fuel line are you running? Share this post Link to post Share on other sites
Lott 35 Posted August 20, 2015 Got a proflow fuel pump mech 100 Gph. See how it goes. Should get time to fit it tomorrow. 1 Thom reacted to this Share this post Link to post Share on other sites
Lott 35 Posted August 21, 2015 Fuelline is 3/8". Fitted new pump, checked the timing and backed it off a little ( thanks xcsedan) Runs real good. The standard taco is in need of an upgrade now, it's not keeping up with the revs I think. 1 Trev Vaa reacted to this Share this post Link to post Share on other sites
Trev Vaa 1,185 Posted August 21, 2015 is it 3/8th all the way back to the tank? or just 3/8th forwards of the pickup, i see it a lot when people put 3/8th line on a 5/16 pickup, pull the pickup out, clean the tank and chuck a new filter on the pickup while you're there. unless that all done already, then no point. no worries on the timing dude see how you go with that pump, if you want to stick to mechanical grab a RobbMc Performance fuel pump, those things are probably some of the best on the market. Share this post Link to post Share on other sites
Lott 35 Posted October 11, 2016 Running https://vimeo.com/186391775 Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Thom 6,639 Posted October 11, 2016 Running https://vimeo.com/186391775 Sent from my iPhone using Tapatalk Was this the one you wanted to put up Share this post Link to post Share on other sites
Lott 35 Posted October 12, 2016 Looks like it was already there. Just learning Tapatalk Share this post Link to post Share on other sites
Thom 6,639 Posted October 12, 2016 It's far easier to load videos to YouTube and just link them across Share this post Link to post Share on other sites
bear351c 10,260 Posted May 12, 2017 Been 6 months, just wondering how you like the XE274...? Happy with the yella terra rollers..? Share this post Link to post Share on other sites
Thom 6,639 Posted May 12, 2017 He seems pretty happy with it, I was around there this morning, I was happy with the rollers when they were on my cuzzo 1 bear351c reacted to this Share this post Link to post Share on other sites
Lott 35 Posted November 6, 2017 Ran at heathcote on the weekend, very disappointing, to much wheel spin no traction. Best run was 15.58@87.89 no traction off line. was running 14.4@99.36 a couple of years ago with cobra jet cam, stock 2v heads and 600 vac sec holly, running on 14" wheels 215 tyres Now has xe274 cam head work roller rockers, 750 dp. 15" wheels 265 tyres. Stiffer leaf springs. Share this post Link to post Share on other sites
Lott 35 Posted November 6, 2017 Ran at heathcote on the weekend, very disappointing, to much wheel spin no traction. Best run was 15.58@87.89 no traction off line. was running 14.4@99.36 a couple of years ago with cobra jet cam, stock 2v heads and 600 vac sec holly, running on 14" wheels 215 tyres Now has xe274 cam head work roller rockers, 750 dp. 15" wheels 265 tyres. Stiffer leaf springs.Sent from my iPhone using Tapatalk 4 FORD_MAN, Free.51, Thom and 1 other reacted to this Share this post Link to post Share on other sites