adrianphu123 73 Posted June 23, 2015 Hey guys, Bit of a knob today and managed to drop a dolly onto the main cap parting face. Wasnt from high up and just managed to get the corner of it but luckily an old bearing shell took most of it. Just wondering if this is going to cause me any problems. No material is raised above the parting face and all damage seems to be outbound of the bearing shell (shown with an undamaged bearing shell. any opinions? adrian. Share this post Link to post Share on other sites
bear351c 10,270 Posted June 23, 2015 All good mate. Make sure the 'dented' bit is sitting flush, or lower, as this will affect bearing crush. Make sure you get all those metal filings out, too! 4 Outback Jack, XTREME KARTS XF, Stevemack and 1 other reacted to this Share this post Link to post Share on other sites
