xcsam 10 Posted March 31, 2013 G'day, I just got myself a Tremec gearbox in good condition that was said to be removed from a Ford. I am aiming to build a 400hp 351 or storker clevo for my XC ute. Previously, I was planning to fit a T5 gearbox from an XF to my ute, but lots of people have advised me against that due to the weaknesses of the T5. Was the first Tremec gearbox the 3550? If so, they are rated at 350 ft/lbs or 474nm for torque, compared with the 265 ft/lbs or 359nm torque of the earliest T5 box. If the box I got is a TKO, it is rated at somewhere between 375 and 400ft/lbs of torque. How do I interpret the torque ratings of the gearboxes. Do you guys reckon that it will be adequate to stand up to the 400 flywheel hp that I am hoping for out of my clevo? Will I need to a) modify my existing single-rail to clevo bellhousing that I was expecting to use, modify the bellhousing that comes with the box, or c) purchase a specific tremec to clevo bellhousing? What are the options for my clutch setup? Thanks guy! Share this post Link to post Share on other sites
Ants 6,370 Posted March 31, 2013 What tremec is it, was it one of the surplus ba xr8 one's? Share this post Link to post Share on other sites
xcsam 10 Posted March 31, 2013 I'm not completely sure, but i'll see if I can identify it and let you know Share this post Link to post Share on other sites
PRO250 1,506 Posted March 31, 2013 im fitting a el t5 into my ute its making 400hp and im not worryed, they dont just go pop unless you do somthing real nasty im still useing my cast bellhousing Share this post Link to post Share on other sites
revhead 1,392 Posted March 31, 2013 got a mate with a tremec behind his blown 383 stroker in his xy ,his came from ford brand new, was excess for the au 3,xr8 range, currently he,s got 820 rwhp ,doesnt have any problems , Share this post Link to post Share on other sites
83xe 5 Posted April 1, 2013 they are strong , but the only problems are the input shafts turning a funny blue colour[heat distorsion] dont let that phase you tho lol , its puzzling just to see one that colour! Share this post Link to post Share on other sites
revhead 1,392 Posted April 1, 2013 i just spoke to him and asked what bellhousing he used ,,he told me hes using a modded toploader bellhousing Share this post Link to post Share on other sites
xcsam 10 Posted April 2, 2013 Ok, cool. I am picking my gearbox up tomorrow morning and i'll let you know exactly which one it is, but judging by what you guys have said, it's exactly what I need for my clevo. Share this post Link to post Share on other sites
Ants 6,370 Posted April 2, 2013 If it's a ba one it won't be easy. Share this post Link to post Share on other sites
xcsam 10 Posted April 2, 2013 I've been doing a bit of research on the TTC- Tremec website, and it looks much like an earlier Tremec T5, not the TR3650 as seen in the BA Falcon. Share this post Link to post Share on other sites
xcsam 10 Posted April 3, 2013 The number on the gearbox is 13-52-065-922, which means it is a T5. Looking online for those numbers, it appears that it was from a 5.0 V8 Mustang between 83-84. The ratios I found are: Reverse- 2.76 1st- 2.95 2nd- 1.94 3rd- 1.34 4th- 1 5th- 0.63 Torque- 305 ft/lb Share this post Link to post Share on other sites