SPArKy_Dave 8,831 Posted May 26, 2015 Full credit for this find, must go to Forum member - Lott. And an eye opening find it is indeed. Seems like the hits just keep on coming in the suspension department, with our old girls. LVVTA_Info_05-2004_Falcon_Balljoints-Aug_2004.pdf http://www.lvvta.org.nz/documents/infosheets/LVVTA_Info_05-2004_Falcon_Balljoints-Aug_2004.pdf I think an OzFalcon sanctioned upper ball joint comparison test might be in order, to see what's out there today, and how it performs. Who agrees? 6 Valvebouncer, wagoon, XTREME KARTS XF and 3 others reacted to this Share this post Link to post Share on other sites
deankxf 20,232 Posted May 26, 2015 well i have made a quick drawing using the pics to make it explainable if you take it into repco or bursons etc.. might be half the reason the cheapshit ones wear out faster even? i wonder if the aftermarket control arms rectify this issue, the shelby drop is meant to help i think too? 5 Stevemack, XTREME KARTS XF, popem and 2 others reacted to this Share this post Link to post Share on other sites
Nath 1,975 Posted May 26, 2015 I'd be interested to know as well... Anyone know if the TRW ones have the same issues? 1 XTREME KARTS XF reacted to this Share this post Link to post Share on other sites
Mr Polson 10,214 Posted May 26, 2015 One point worth making - I believe XF (and maybe XE) have longer bumpstops than XD and earlier? Second - I can confirm Protek brand have sufficient travel as I had my ute sitting on the bumpstops for quite a while. But in saying that it is a XF with the possibly longer bumpstops. Share this post Link to post Share on other sites
wagoon 2,429 Posted May 26, 2015 This thread is the reason why this forum is the best. 2 SPArKy_Dave and Nath reacted to this Share this post Link to post Share on other sites
bear351c 10,260 Posted May 26, 2015 Thanks Sparky Dave, and Lott. As they say, 'a picture tells a thousand words'..... don't have to be a rocket scientist to know some of those ball joints are Fookin Shite.! Used to sell a lot of QH and TRW stuff at the parts shop, (way back when,) never had one come back. 2 Nath and XTREME KARTS XF reacted to this Share this post Link to post Share on other sites
hendrixhc 10,918 Posted May 26, 2015 Are any of the failed brands mention still available? The document is 11 years old. Or are you saying we should test the current aftermarket ones to compare their specs? Share this post Link to post Share on other sites
bear351c 10,260 Posted May 26, 2015 These days, a lot of stuff is made in Asia, (cheap labour) and sold as Australian. Not sure ANY are made in Oz anymore. But, I reckon a comparison of todays stuff would be nice. Anyone got a FoMoCo original ball joint with rivets, still in the box?? Share this post Link to post Share on other sites
SPArKy_Dave 8,831 Posted May 26, 2015 Are any of the failed brands mention still available? The document is 11 years old. Or are you saying we should test the current aftermarket ones to compare their specs? Some are still available, yes. And yes, I think an Aussie re-test is in order. Share this post Link to post Share on other sites
SPArKy_Dave 8,831 Posted May 26, 2015 One point worth making - I believe XF (and maybe XE) have longer bumpstops than XD and earlier? Second - I can confirm Protek brand have sufficient travel as I had my ute sitting on the bumpstops for quite a while. But in saying that it is a XF with the possibly longer bumpstops. XD-XG factory bumpstops are longer, XK-XC/Mustang are shorter. But........ ONLY the shorter style is available aftermarket, and is sold as suitable for XK-XG. I don't think genuine bumpstops are available anymore in either style. Maybe do a test - take the boot off the balljoint, and remove the spring/shock, and see what the balljoint clearance is like, throughout the full arc of travel. From left to right - NOS XD-XG (nla) Mackay Rarespares Superpro Share this post Link to post Share on other sites
hendrixhc 10,918 Posted May 26, 2015 I assume these parts are supposed to meet an Australian standard. It would be interesting to see any current data, who the testing Authority is or if they even bother. You would kind of hope that some one has done their due diligence as it is a fairly critical component on the car. Share this post Link to post Share on other sites
steve mcqueen 1,796 Posted May 27, 2015 I can confirm "there is no upper ball joints from REPCO in the SILVERLINE brand in any Repco store in NSW" Their distribution center doesn't have any and has no plans on ordering them either. Repco sell TRW or Transteering ball joints and prefer to do so. We find if and when asked for a ball joint that we refer to the TRW part number and nothing else. We do have a few silverline brand tie rod ends in stock for different cars but not bloody many, mostly Toyota crap. Any body who buys a Silverline brand part from anywhere clearly has no money to buy a better product, and trust me, we see it all the time. We give the customer a quality brand, tell em the price and they always go, "is there anything cheaper" Filters, tie rods and brake shoes, if you ask for a cheap brand then you get what you pay for, if your car wont stop properly cause you aint got any money to buy better quality brake pads bar Silverline then 'you need to save up till you can'. Dave and Lott, i give you guys credit for letting the members no about this poor quality product, if you here of any more, speak up. At the same time people, put a good well known brand/product on your car, do it once do it right. 1 XTREME KARTS XF reacted to this Share this post Link to post Share on other sites
deankxf 20,232 Posted May 27, 2015 I can confirm "there is no upper ball joints from REPCO in the SILVERLINE brand in any Repco store in NSW" Their distribution center doesn't have any and has no plans on ordering them either. Repco sell TRW or Transteering ball joints and prefer to do so. We find if and when asked for a ball joint that we refer to the TRW part number and nothing else. We do have a few silverline brand tie rod ends in stock for different cars but not bloody many, mostly Toyota crap. Any body who buys a Silverline brand part from anywhere clearly has no money to buy a better product, and trust me, we see it all the time. We give the customer a quality brand, tell em the price and they always go, "is there anything cheaper" Filters, tie rods and brake shoes, if you ask for a cheap brand then you get what you pay for, if your car wont stop properly cause you aint got any money to buy better quality brake pads bar Silverline then 'you need to save up till you can'. Dave and Lott, i give you guys credit for letting the members no about this poor quality product, if you here of any more, speak up. At the same time people, put a good well known brand/product on your car, do it once do it right. there shouldn't be an unsafe option available for sale..full stop. prices for better than OE quality higher would be fine. 2 XTREME KARTS XF and steve mcqueen reacted to this Share this post Link to post Share on other sites
JG33 33 Posted May 27, 2015 I bought a set of balljoints for my ute, WASP is the brand, I doubt I have had them for 12 months and the rubbers are already split. Is there any other brand of Balljoints/Tierods that's decent? Nothing seems to last nowadays. Share this post Link to post Share on other sites
SPArKy_Dave 8,831 Posted May 27, 2015 The main brands available these days, seem to be - Roadsafe TRW - a Repco special Transteering Wasp Protex Ford Motorcraft - Taiwanese balljoints Rare Spares - unbranded ebay - unbranded specials Moog - premo brand from the USA 555 - when you can find them HOWEVER - it's questionable just how many of these brands (if any) have the range of movement the old Aussie 3 piece TRW ball joints had. Share this post Link to post Share on other sites
steve mcqueen 1,796 Posted May 27, 2015 there shouldn't be an unsafe option available for sale..full stop. prices for better than OE quality higher would be fine. I so 100% agree, but weather you buying an air filter for your car or a $9 electric kettle from Big W, these crappy products are out there, so its up to the 'consumer' to think twice "will i go cheap and nasty, or buy a little bit better"? With the aid of the internet these days and personally talking with your mechanic, we should research products before we perhaps fork out our hard earned $$ but we are just to lazy to do so + and this is a big +, we trust the product that comes out of the box, believe me i have been bitten more than once building project goldie, the money i have wasted on that due to it being a shit product and not up to my standard or being incorrect so im guilty to Share this post Link to post Share on other sites
deankxf 20,232 Posted May 27, 2015 there should be laws making it illegal to sell dangerous "new oem replacements" there may well be, but when i had the tie rod incident, no one wanted to take it up, i contacted several places and all refered to the next place till it came back to the first i inquired with (p.s. My $7 kettle works better than the $65 one i had last) http://www.ozfalcon.com.au/index.php?/topic/2603-warning-please-read-cheap-parts-danger/ Share this post Link to post Share on other sites
SPArKy_Dave 8,831 Posted May 28, 2015 there should be laws making it illegal to sell dangerous "new oem replacements" Like this 'OEM' replacement? Share this post Link to post Share on other sites
SPArKy_Dave 8,831 Posted May 28, 2015 I think it's up to us, to do the hard work. The problem is too 'obscure' for regulators to be interested IMO. I could easily get onto Alibaba, and import a crate of BJ94's from some chinese seller, to flog on ebay. There is no regulation I don't think. Only self certification. Share this post Link to post Share on other sites
deankxf 20,232 Posted May 28, 2015 I think it's up to us, to do the hard work. The problem is too 'obscure' for regulators to be interested IMO. I could easily get onto Alibaba, and import a crate of BJ94's from some chinese seller, to flog on ebay. There is no regulation I don't think. Only self certification. what are the yanks using? are there good ball joints over there or are they importing the same junk from china? Share this post Link to post Share on other sites
TUFE 284 Posted May 28, 2015 Do the yanks have cars that need the 3 bolt type? Ive got wasp brand stuff up front, ill have to look at their travel potential now Share this post Link to post Share on other sites
deankxf 20,232 Posted May 28, 2015 Do the yanks have cars that need the 3 bolt type? Ive got wasp brand stuff up front, ill have to look at their travel potential now pretty sure one model does, not sure if its the mustang or ranchero/torino thing? Share this post Link to post Share on other sites
JG33 33 Posted May 28, 2015 I've bought some Moog tie rod ends from the US MOG-ES363RL and MOG-ES360RL very similar to ours. Trying to figure out which balljoints would suit our cars at the moment. Share this post Link to post Share on other sites
SPArKy_Dave 8,831 Posted May 28, 2015 They do have a MOOG upper ball joint to suit the Aussie Falcons - K8142 is the part number. Suits the Ford Torino's, and some Lincolns. The lower ball joint only seems to come as a part of new lower arm assemblies. And from the pics, it certainly looks like it'd have the correct travel. It has the cutout front and back, to allow the spindle to lay over more. http://www.ebay.com/itm/Moog-Front-Upper-Suspension-Ball-Joint-K8142-/381228686768?fits=Make%3AFord|Model%3ATorino&hash=item58c3001db0&vxp=mtr http://www.ebay.com/itm/Suspension-Control-Arm-and-Ball-Joint-Assembly-Front-Right-Upper-Dorman-520-105-/351054938096?fits=Make%3AFord|Model%3ATorino&hash=item51bc813ff0&vxp=mtr http://www.ebay.com/itm/Moog-K8202-1972-79-Ford-1968-79-Lincoln-Front-Upper-Control-Arm-Bushing-Kit-/330868480444?fits=Make%3AFord|Model%3ATorino&hash=item4d094c59bc&vxp=mtr http://www.ebay.com/itm/New-Pair-Set-Front-Lower-Control-Arm-Suspension-with-Bushings-Ford-Mercury-/390978646812?fits=Make%3AFord|Model%3ATorino&hash=item5b0824b31c&vxp=mtr http://www.ebay.com/itm/Moog-Front-Lower-K8123-Suspension-Control-Arm-and-Ball-Joint-Assembly-/301646698946?fits=Make%3AFord|Model%3ATorino&hash=item463b8b59c2&vxp=mtr http://www.ebay.com/itm/MOOG-K8192-Suspension-Control-Arm-Bushing-Kit-Lower-Control-Arm-/171805362727?fits=Make%3AFord|Model%3ATorino&hash=item280065ca27&vxp=mtr http://www.ebay.com/itm/Unimotive-BJ1812-Suspension-Control-Arm-and-Ball-Joint-Assembly-Front-Lower-/291373573358?fits=Make%3AFord|Model%3ATorino&hash=item43d737e4ee&vxp=mtr http://www.ebay.com/itm/Ford-Mercury-Lower-Control-Arm-W-Ball-Joint-Bushings-Front-Left-LH-Or-Right-/371281099878?fits=Make%3AFord|Model%3ATorino&hash=item567213fc66&vxp=mtr http://www.ebay.com/itm/Suspension-Control-Arm-and-Ball-Joint-Assembly-Front-Lower-MOOG-CK8123-/141678199326?fits=Year%3A1970|Make%3AFord|Model%3AMustang&hash=item20fcadc21e&vxp=mtr Share this post Link to post Share on other sites
TUFE 284 Posted May 28, 2015 Ball joints are pretty damn critical. I wouldnt want one shearing off when im dragging it Share this post Link to post Share on other sites