hendrixhc 10,918 Posted January 16, 2015 Youll need a high volume oil pump if you want your car in Extreme Fords magazine. 5 gerg, slydog, wagoon and 2 others reacted to this Share this post Link to post Share on other sites
ando76 4,354 Posted January 16, 2015 I also agree with stock oil pump, the race engines I built run the same "big" clearance as Ando and the stock pump has plenty of pressure. Ando will give you the measurements for the relief valve, I also do the clearances inside the pump, I run 1.5 thou cover to rotor clearance, that had Ando worried hahaha but all good in the hood. Only cause I run a fraction more clearance but you have proved you can go tighter without issue. Oh and I wont be giving away any measurements - how can I make money selling me oil pumps if I give away all me secrets? Lol. I can vouch for the pic Ando posted as that is my hand holding the pressure gauge attached to my roller cammed crossflow in my shed. I have a spare hi volume oil pump sitting in my shed that I wont sell to anyone cause I dont feel right in passing on something that will hurt someone elses engine. I wouldnt even give it away. Is that the one I was going to throw across the back paddock - until your massive mitt stopped me. lol. 1 Clevo120Y reacted to this Share this post Link to post Share on other sites
