ricktewagon 39 Posted September 8, 2014 Hey guys, recently bought a Corty with 15" SAAB rims on, problem is the guy I got it off was still running the stock Corty wheel nuts. Now they hold the rim on but it seems to me they don't have enough taper and sit too deep. My question: is anyone running SAAB rims on their Corty & what wheel nuts are they using? Had a bit of a look around the net and what I could find is expensive as fuck. Don't want to pay the money to have them not work. Thanks guys. Also would I be right in saying the thread size is m12X1.5? & does any-one know the taper on a stock Corty wheel nut? Share this post Link to post Share on other sites
gerg 10,871 Posted September 8, 2014 That thread is commodore size, maybe that could be an avenue to follow. Share this post Link to post Share on other sites
Mixalis 266 Posted September 9, 2014 I only run mine for the track, from memory I just went and bought wheel nuts from SuperCheap, forgot the size but was a while ago. They seem to have worked fine both times. Forgot the price tho i think aroun $20, can't remember if that was for one or both sides tho sorry mate hope that helps, was a while ago Share this post Link to post Share on other sites
ricktewagon 39 Posted September 9, 2014 Thanks guys, I guess my best bet is to take a rim of and take it to some shops. Share this post Link to post Share on other sites
BigCav 464 Posted September 10, 2014 http://www.niceproducts.com.au/catalogues/wheel/nuts.php 1 Mixalis reacted to this Share this post Link to post Share on other sites
winton 399 Posted September 13, 2014 Rick this is what you want, I think they are called acorn wheel nuts, yes same thread as commo. 1 ricktewagon reacted to this Share this post Link to post Share on other sites