bigpaulo 239 Posted July 10, 2014 Im getting pretty desperate here.. On the heater box in an XF there is a multi vacuum line plug. When pulling my car apart 3 of the vacuum lines came out of this plug and now I need to figure out where they go. I have two BLACK vacuum lines that go into the engine bay, one of them connects into a T piece off the manifold, the other one is blanked off. I need to know where these ones fit in the plug. I have drawn a diagram to help explain. This is the colour of the vacuum lines in the plug on the heater controls side. The holes with question marks are where I need to fit the BLACK vacuum lines coming out of the engine bay. If they were colour coded in the engine bay this would make it a lot easier. If anyone could help me that would be fantastic. If this diagram does not make sense please ask for more info and i'll do my best to explain. Cheers Share this post Link to post Share on other sites
Stevemack 122 Posted July 10, 2014 As far as i remember, the black is the vacuum supply, green is the heater tap orange is to one of the vents on the heater box, can't remember which one though. Share this post Link to post Share on other sites
Outback Jack 6,352 Posted July 10, 2014 Here ya go mate, from the Workshop manual....... Sorry theres no colour pictures.... just be aware there are 2 control assemblies on that second pic. Jack. 2 XFute-1JZsoarer and bigpaulo reacted to this Share this post Link to post Share on other sites
bigpaulo 239 Posted July 10, 2014 absolute champion, just what i needed! cheers for that jack! Share this post Link to post Share on other sites
Outback Jack 6,352 Posted July 10, 2014 Never a problem Mate =) , I got manuals here and its farkin cold outside..... hehe. Enjoy. Jack. Share this post Link to post Share on other sites