Joelxf92 14 Posted April 28, 2014 Bought some headers with a high flow cat Only problem is they are a different size only About 300mm to short and they are trying to charge me 280 buks for 300mm of metal Anyway I'd thought I'd show you the extractors and a before and after picture of them also a sound and performance test on the street haha first post on this forum so thanks guys 1 gerg reacted to this Share this post Link to post Share on other sites
XFChris 126 Posted April 29, 2014 Are those alloy head only extractors? They present well, most of that charge is probably labour costs, try a few other places to see if you get a better quote. Share this post Link to post Share on other sites
nos2 751 Posted April 29, 2014 Supply the metal and just pay for the weld! I'd be having a flick through the yellow pages for welders. Should cost you bugger all. Welcome to ozfalcon! Share this post Link to post Share on other sites
Joelxf92 14 Posted April 29, 2014 Thanks mate I made a deal with a guy who comes I'm to my work I'll install the headers and high flow cat and drop it off in the morning gonna be loud lol but I start work at 5am so shouldn't be and issues with the cops lol I will make a video for sure haha Cheers Joel!! Share this post Link to post Share on other sites
Joelxf92 14 Posted April 29, 2014 Are those alloy head only extractors? They present well, most of that charge is probably labour costs, try a few other places to see if you get a better quote. They better be mate haha I bought them used from clontarf wreckers redcliffe they said there for an alloy head so I hope so Cheers Joel!! Share this post Link to post Share on other sites
Mr Polson 10,214 Posted April 29, 2014 Yeah they look like alloy head only, I can't see the holes for cast iron pattern too. $280 is way expensive, when I put mine on, I installed them myself and drive to the shop (yes, they're rather loud like that), the shop welded in extra pipe and added one of those slip joints with a clamp, think it was $50. 1 gerg reacted to this Share this post Link to post Share on other sites
gerg 10,875 Posted April 29, 2014 That guy must be having a laugh... Max 10 bucks worth of pipe, another 10 for welding wire/gas, and $260 left for labour? I would be shitty if quoted half that! 2 wagoon and nos2 reacted to this Share this post Link to post Share on other sites
Joelxf92 14 Posted April 29, 2014 I was like nah mate that's ridiculous I found a place do it for 50 buks thanks guys Cheers Joel!! 2 PH351 and gerg reacted to this Share this post Link to post Share on other sites
wagoon 2,429 Posted April 29, 2014 Is that $280 quote to remove the old manifold, supply new gaskets, modify new extractors and then install new system onto car. Still expensive if it is but makes a bit more sense. For labour costs I work on $80/hour at a small mechanic shop and $100/hour at a large chain mechanic like midas/ktas. Share this post Link to post Share on other sites
Joelxf92 14 Posted April 29, 2014 I supply the gasket the metal from the old exhaust can be used as the new stuff this was from macs mufflers but I also said I'd fit it he still said 280 Cheers Joel!! Share this post Link to post Share on other sites
