RAWDEAL 222 Posted February 9, 2014 Hi guys just putting a 4.0 ohc into my xb .. ive got a clevo getting built and getting bored at home and well.. i have like 10 of these engines laying around haha.. i already have a straight gas car so should be an easy conversion wondering wether i can buy a 6cylinder upper engine mount that is 90mm wide? (to suit the lower mount that mounts on the crossmember) as seen in the pic the upper mount is to narrow for the lower mount , lower mount is what i was using to run a clevo, i am not sure if there is a narrower lower mount i cant find the old mounts off of my pre xflow, i am not sure if they run a different mount.. i thought id ask here before i go spend 50-100$ on mounts! anyone know of a decent place to sell me some mounts in the dandenong area? Share this post Link to post Share on other sites
Jonathan Mark Davidson 169 Posted February 9, 2014 grab some xf lower mounts they will work well any xflow lower mount should 1 XTREME KARTS XF reacted to this Share this post Link to post Share on other sites
BigCav 464 Posted February 10, 2014 throw a 6 cylinder base plate on, xa - xf have the same mounting pattern Share this post Link to post Share on other sites
RAWDEAL 222 Posted February 10, 2014 Thx guys ! i was sorta sure but not 100% The lower mounts in that pic are v8 ones anyone got a set of xf ect 6cyl lowers to sell me ? Share this post Link to post Share on other sites
ando76 4,354 Posted February 10, 2014 yeah mate got a set of 6 cylinder mount off an xa here in Cairns. can post Share this post Link to post Share on other sites
RAWDEAL 222 Posted February 11, 2014 yeah mate got a set of 6 cylinder mount off an xa here in Cairns. can post Im in vic , 3340 , not sure on how much the post would be , id say it would be way to expensive for my liking lol Ill chuck and add up in the wanted section Share this post Link to post Share on other sites