Crebe 21 Posted June 28 I have a 66 xr ute with an xa width borgy (M76?)in it behind a 94 5lt xr8 motor and BTR. The borgy is hanging in there but the 25 spline axles have a slight woble and cant get replacements or get them fixed! I am having trouble getting a decent builder to make a diff for me. I have changed my mind from getting a bigger borgy or dana or 9 inch (I have a nice xy housing) but they have all got drawbacks. 9 inch are VERY heavy and I dont realy need one with my stock 5lt. The little borgy is limited to what little stuff I can by for centres and the m80s are probably the size for me but cant find a builder that will supply EVERYTHING! I find most builders are in Melbourne or vic and thats not close enough as I am in Newcastle area. So for its either they dont like m80s, want use 2nd hand parts, use the centres they have, use the new heavy after market 9 housings not mine, want to build the diff as they say not what I ask for, wont do brakes and brake lines and wont do handbrakes. Maybe I am fussy wanting them to make a complete item but? Anyway any segestions? Looking for trutrac 31 spline, disc brakes either 9 inch as I have a housing or m80? Any help appreciated. 2 deankxf and bear351c reacted to this Share this post Link to post Share on other sites
bear351c 10,685 Posted June 28 Well, that's disappointing. Hope someone can help with a recommendation. I'm no help down here in SA The Granny State. My preference would be for a 9 inch, but I'm biased Purely for interchangeability of centres/ratios. Can be done in the shed, if you ever decide to go on an interstate trip and want better fuel economy. Share this post Link to post Share on other sites
