Jump to content
Server maintenance Read more... ×

xebruce

Members
  • Content Count

    81
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by xebruce

  1. xebruce

    XH XR6 misfire?

    Unplugged the wiring harness to get more access and was pretty careful with it. Sent from my iPhone using Tapatalk
  2. xebruce

    XH XR6 misfire?

    Got a 1998 XH XR6 and it had the common misfire when idling. Replaced the coil,leads and distributor cap. didn't fix it so replaced intake gasket and that fixed the problem. BUT now the revs will just randomly drop down and its died coming up to lights a couple of times. Misfire has gone but now the idle seems screwed up. Any ideas? Thanks Bruce
  3. xebruce

    XH XR6 misfire?

    Rythmic gasket was blown out on the rear cylinder Sent from my iPhone using Tapatalk
  4. xebruce

    XH XR6 misfire?

    Thought that too about vacuum hoses. Triple checked them all. And the idle speed motor would be what? Lol Sent from my iPhone using Tapatalk
  5. xebruce

    XH XR6 misfire?

    Unhooked the battery before I did anything so shouldn’t have blown anything I wouldn’t have thought but who knows will check the air con Monday. Left it at work with the battery unhooked for the weekend. Auto sparky thought it might be the computer because it’s been so use to running like crap the last 6 months? Sent from my iPhone using Tapatalk
  6. bought a t5 combo out of a mustang to bolt up to my cleveland. Came with bellhousing, fly wheel, clutch, fork ect. The fly wheel it came with is a 157 tooth 50oz ford one.When i got my motor built the rotating assembly was sent away and balanced. Wondering what sort of fly wheel i should be using with it?
  7. xebruce

    Fly wheel option.

    I assume if i get a 28oz one and match it up with the flex plate when i take the c4 out I should be able to copy where the material was removed from the flex plate when it was balanced and it should be close enough. But then again we all know wat happens when you rely on assumptions lol. Any input would be well received thanks
  8. Wanting a xg ute for work but need a bench seat, column shift. Been looking for a while and they don't seem to pop up down here. Plenty of the XG XR6 utes around. Wondering how hard to convert one to column shift. I assume you would just need a wrecked one to pinch the steering column out of and the linkages.
  9. Wondering if anyone can shed some light on this for me. I have an XE ghia, central locking has never worked with the key or switches in the front armrests. I have recently had an alarm installed and now the central locking works off a remote . When you use the armrest switch the interior lights will flicker and the volt gauge will also drop. I can here a relay sort of noise somewhere in the dash but it will not operate the central locking. Have tried different switches in the armrest as i have spares? Maybe a simple fix just unsure where to look. Thanks for any help Bruce
  10. xebruce

    central locking switch in armrest

    All the original door actuators still working so will check earths for a start. They look like they want to move with the arm rest switch but not enough grunt. But plenty of power if using the remote. They have never worked off the armrest switch as long as I’ve had the car but they have always made the actuators move a little. Sent from my iPhone using Tapatalk
  11. Ended up buying an XH XR6. Swapped the column shift over from a EL parts car no problems, everything just bolted up. The bench seat has been a bit of a nightmare though. The holes are in the floor for the front mounts are there but no nut on the underside. Rear mounts line up sweet. Modified the front brackets on the seat rails as the bucket seat mounts were about a bit wider. Got the mod done by and engineer for cert purposes. Came back from cert with them wanting to know if the factory mount i have the lap belts bolted to are designed to take the load of 2 belts. Buggered if I know how I'm supposed to find that out. Seat rail mod, lowering, wheel spacers, column conversion and the 20inch rims all good only being held up on this. fml.
  12. xebruce

    New wheels on the work ute XH XR6.

    Had to run 2 inch spacers with them Sent from my iPhone using Tapatalk
  13. Sent from my iPhone using Tapatalk
  14. Looking at buying a T5z out of a AU XR8 to put behind the clevo in my XE. I see the starter is on the other side of the bellhousing is this going to be an issue or is there any other issues i should be aware of. I assume the bellhousing will bolt up to my cleveo. thought they were the same as windsors? Would apperciate any feed back, Thanks
  15. xebruce

    AU3 XR8 T5z into clevo XE

    been pricing up the different options and looks like i'm just gong to have to wait to do this conversion. Got a holiday to Fiji coming up and then my wedding. Looks like i'm going to have to put up with the C4 for now. Thanks for all the info guys.
  16. xebruce

    AU3 XR8 T5z into clevo XE

    So emailed Mal Wood about the cleveland and the E series 6cyl T5 and this was there response. Hi Bruce, We do not make a Bellhousing to fit your Ford V8 using the Ford 6 T5. The front shift of the bush box is not long enough. Kind Regards, Jeff @ Dellow Conversions Bugger. guess that means there bellhousings are suited to the 8cyl ones or the mustang one with the longer shaft.
  17. xebruce

    AU3 XR8 T5z into clevo XE

    Thanks for for your insight guys. Found a e series one locally so will go check it out in the weekend. how do i tell the difference between the 6 and 8 input shaft lengths to make sure is a 6 cyl one and wether its a t5 or t5z.
  18. xebruce

    AU3 XR8 T5z into clevo XE

    Thanks guys, sounds like to much stuffing round for me. Looking for the most straight forward option. There must be a pretty much bolt in option? There is a couple of trans places here that will put together a kit to bolt up to a Cleveland but the price is pretty steep. Which T5 am I best to look for?
  19. Just put a new 570 holley and intake on my 302. Was going to install a kick down cable as there is none. Got the cable and went to put it on. The kick down lever on the trans has no spring tension on it you can just wiggle it back and forth???? The guy I bought the car off said the trans had been rebuilt and everything works good. He said it had been shift kitted does this have anything to do with it. Cheers
  20. xebruce

    Alloy Radiator Questions

    Also remember that late model fans are only designed to pull air through a 26mm core
  21. Wondering if anyone in nz has a pair for sale. doesn't matter what condition the fabric is in as I will have to recover them to suit esp interior anyway. Thanks
  22. xebruce

    Alloy radiator fitment

    Southland Radiators. I can get it sent direct to you free freight.
  23. xebruce

    Alloy radiator fitment

    don't waste your money on the alloy one mate its a pretty rubbish one. Put the money towards a decent copper brass factory one. I own a radiator shop in Invercargill. Im away tomorrow for a couple of weeks but you could give the guy that's looking after the shop for me and tell him you know me off here and ill tell him to do you a deal. Better radiator and they are serviceable later down the track and got the trans cooler in them.
  24. What a mission. Ive got an xe Fairmont with a 302 put in it. First I removed the inner hand brake cable normally not too bad but the headers I have are a bit close to the 3 nuts. Had to bodge up a bit of a tool to get to one. Then the power steering box. No way it was coming out the bottom and didn't really feel like lying under the car taking starter and exhaust off. so took the brake booster out and removed it that way. Will take some photos of the tight spots tomorrow.
  25. xebruce

    cams

    Just done up the heads on my 302c no porting or anything just new valves, seats, guides, springs etc. Don't know anything about cams and need some options. Its got a 570 street avenger carb, performer intake. 2v closed chamber heads. headers with twin pipes two cobys and an H pipe. Going to replace cam, lifters and timing gear. Its got a c4 and the factory diff it used to be a manual 6cyl efi xe ghia. Its just a weekend car not an everyday driver, something to put a smile on my face after driving my shitty diesel bighorn all week.
×