xwroo

Yea true. I might go for their 'entry level' cam.

224/234 @0.050'' be to big? I've been looking at edelbrock manifolds and seen they make their manifolds to suit their cams. They call the cam 'Performer RMP camshaft ' and they say run a 'Performer RPM' or ' RPM Air-Gap' manifold. Any thoughts?

Thanks guys, I've pass his name on to my mate, who as got a xy with a 393 storker. He just wanted someone who know what they are doing to tune it to get it running at its full, he only uses it for a sunday drive.

another quick question what size carby should I go for 600cfm or 650cfm?

thanks for all the help guys im sure ill be heading in the right direction.

should wash your mouth out saying that word haha. Yea I know about them.

Not sure if this is the right place but is there any good/reliable dyno tuners out there? Someone one who know how to tune a carby engine well.

Looking for someone in and around Brisbane/gold coast and anywhere in between.

Any of the big name brands good to use? I was on the edelbrock site and they seem to have intakes to match their cams. Any brand to stay away from?

dual or single plane?

carb 302w its in my xw

I'm guessing hydraulic haha

upgrading the valve springs is a no brainer? Would getting a intake manifold to match the power range of the cam be a good investment as well?

hey guys,

When it comes to cams I know nothing!!! Just wanting to know what would be the biggest cam I could put into my 302w without running a stall converter or having any vacuum/ braking problems. Keep in mind my car is a very mild cruiser.

Cheers for any help...

Done some work on the xw this morning and found threaded holes, one in the parcel shelf which has a thick plate underneath and one in the floor and the same on the other side would this be the seat belt holes?

I was just really wanting put one or two in, cause I got my first baby on the way and would love to take him/her driving.

The two seatbelts look to be from factory but I couldn't tell you. I wouldn't think it would be a big deal if 4 more seatbelts got added if it was done though the right channels.

Hi, I've got a XW which im sure its factory. Its got bench seats front and rear, on the compliance plate its complained for a 6 seater but it only as two seatbelts. I got a few questions to ask.

- Since its only got two seatbelts, should there be holes from factory to fit more?

- If I want to fit more seatbelts does it have to get engineer (I'm in QLD)?

Thanks for any help..

thanks for all that guys. Bye Bye antenna hole haha

Just wondering if there is an aftermarket antenna out there that can be hidden so I don't have to have one coming up though my guard? Have had a look on ebay and only found two ''antenna boosters'' they do the same job?

One of my mates has 9.5" rims with 295s without the quarters rolled and fit. I suppose it's all in the offset.

Lowered 2.5in with blocks by the owner before me. I'm looking into getting the leaf springs reset or custom ones made.

Hi looking at getting a pair of 15x10 wheels on the back of my xw falcon. Would 295s or just stick with 275s. Would a 5" backspace be ok as well?

If I get a wheel that's got a 5" backspace and if I put a .25" wheel spacer on will that make it a '5.25' backspace?

Hi all, after some info on my xw trans and diff. On the id plate under trans its got a 'R' is that a c4? What type of diff do I have the tag reads like this...

Part No ARC9DW4005 C

Ratio 2.93 Ser No 012956

The tag is pretty hard to read but I think that is correct.

Thanks for any help

That easy hey? Thanks for that big help!!!