Jump to content

hendrixhc

Moderators
  • Content Count

    12,088
  • Joined

  • Last visited

  • Days Won

    189

Everything posted by hendrixhc

  1. hendrixhc

    Wheels for xg falcon ute

    I had 14 x 8 with 265 60 14 on the back of my XG. They fit fine. I now have 15 x 8 with 275 60? 15 with 4.5" BS. They fit fine but rub when there is a load in the tray. Best fix for this is not to put anything in the tray!
  2. hendrixhc

    Xf bolt on spoiler

    Still show as available here https://www.ssv.com.au/front-spoiler/~-2183
  3. hendrixhc

    Xf bolt on spoiler

    Here are some picts Steve of my spoiler. The spoiler ìs called a Monza I believe. I have screwed mine too the bumper now due to they can be quite weak and I wanted better lines. Sent from my SM-G973F using Tapatalk
  4. hendrixhc

    1971 Ford Fairmont Station Wagon

    NIce Wags.
  5. hendrixhc

    FMX dipstick?

    I just want a pan for mine that isn't dented and pitted. No after market ones available.
  6. hendrixhc

    FMX dipstick?

    From what i understand the are hard to get. You can get aftermarket from Lokkar if that interests you.
  7. hendrixhc

    ball bearing in brake caliper?

    Not the ball out of the end of a bleed nipple snapped off inadvertently? I found a Philips head screwdriver in the drivers door of Lucy yesterday!
  8. hendrixhc

    Intake gaskets

    Corks fine as said, long as you use some sealant. I also fitted the valley pan. No leaks at all.
  9. hendrixhc

    eBay radiators

    Ive used an alloy ebay radiator in the XC for bout 4 + years with no issues, runs cold all day.
  10. hendrixhc

    Lining up two front doors on a ute

    Funnily enough i have had to slot the passenger side guard bolt holes to get some panel gaps as well.
  11. hendrixhc

    Lining up two front doors on a ute

    Sometimes you even need to cut 3mm off the bottom of the door to get the gaps right.
  12. hendrixhc

    exhaust sounds

    Like a Clevo!
  13. hendrixhc

    Panko's Mk1 Escort (Round 2)

    The 1600 escort is a fun little car to thrash but i would go the pinto with twin sidedraft webers. Old school cool all the way.
  14. hendrixhc

    XG FUEL Sender for sure.

    Im looking at pissing off the fuel tank in the ute and fitting a fuel sell but id like to know for sure if the gauge uses a resistive sender. From what i can interpret from the service manual it does. I can get a 5 bolt sender from aeroflow in three different resistance ratings but as per usual on the internet everyone has an opinion but id prefer a definitive answer. Any help appreciated.
  15. hendrixhc

    XG FUEL Sender for sure.

    I guess i should really check the NC fairlane manual to cause i may use the digi dash with the weezer conversion
  16. hendrixhc

    XG FUEL Sender for sure.

    Yeah thanks JAck, got one here. One section shows resistance but another suggests voltage outputs. It states that the resistance should be between 11 and 152 ohms, of course which doesnt exist as an aftermarket sender.
  17. hendrixhc

    2v extractors or 4v?

    Exhaust ports on 4v are larger so 2v wont fit.
  18. hendrixhc

    Panko's Mk1 Escort (Round 2)

    Does this mean they wont ever insure it again?
  19. hendrixhc

    clocking rings 250 crossflow

    Welcome aboard Bud! What Sly said ^^^^^
  20. hendrixhc

    Panko's Mk1 Escort (Round 2)

    For Fuck Sake is all i can say. Long as youre all right thats the main thing. This is why i drive my cars less and less on the road.
  21. I like the "SAVY" kit for the bargain price of $7000.
  22. Yeah been looking at their site but lousy info and no pricing
  23. Where do you get hoppers from, cant find a supplier or price list?
  24. Interesting, i was thinking of the Wilwood upgrade.
  25. hendrixhc

    Xh Ute 2 inch drop and wider wheels.

    Redundancies suck cause they make you feel somewhat worthless. I got made redundant after 9.5 years at my last job. I realised then it wasnt me but poor management on behalf of the place i was working. Chin up a new opportunity will present itself.
×