Jump to content

deankxf

Administrators
  • Content Count

    22,256
  • Joined

  • Last visited

  • Days Won

    990

Reputation Activity

  1. Cool
    deankxf reacted to bear351c in Panko's Mk1 Escort (Round 2)   
    Tyres make a huge difference. I took the Globe mags off the XB, and stuck the stockies back on, and couldn't believe the noise/vibration. New boots all round, and Wow!  so smooth.
     
  2. Cool
    deankxf got a reaction from Stumps in EFI Crossflow..worth playing with   
    EA to EL wagon tank is the go for the XB sedan i'm fairly sure. (doesn't have a spare wheel recess but bolts in from memory)

    the fuel sender will need mods, i saw someone additionally fitted the XB sender to the EL tank and ignored the EL gauge, just depends if you want to do it that way or not. 
  3. Cool
    deankxf reacted to Panko in Panko's Mk1 Escort (Round 2)   
    The tyres are old. all of them need replacing. but the 15s on the front at the moment have not been on the car for a couples years. been in storage, so no flat spots. 
     
    Regardless of whether the wheels/tyres are the issue, once i have this mostly sorted, I will be replacing whichever set of tyres for the wheels i decide to keep on the car. 
     
    I don't believe its tyres. 
     
    Since my last post, I have dialled in the caster and camber, although it is not 100% yet. 
    Currently the settings are;
     
    Castor: 
    LHF: 4.8 degrees + (have not adjusted) 
    RHF: 4.2 degrees + (up from 2.5 degrees+) 
     
    Camber:
    LHF: 1.5 degrees - 
    RHF: 1.5 degrees - 
     
    **these are not super accurate as I am using a basic bubble degree tool to measure** 
     
    Since dialling in the castor and camber, the steering has gotten lighter. I have only driven around the immediate block, as the toe angle is still yet to be set. 
  4. Cool
    deankxf reacted to Panko in EFI Crossflow..worth playing with   
    Ok a lot to unpack here. 
     
    As Dean mentioned above, yes I have done a full EL ECU with J3 conversion into my factory EFi XF Ghia wagon with a 5 speed box. 
     
    It is not worth using a J3 in the XF ECU. it would plug in, whether it does anything to the ECU im not sure. I know back in the day you could run a Moates Quarterhorse in the factory ECU to tune them. 
    The EL ECU is a much faster processor than the XF and early E series ECUs. You need a J3 in the EL ECU so it doesn't look for smartlock etc. 
     
    The cost of the whole conversion is relatively inexpensive. 
    The pin out from XF to EL is identical apart from 1 pin, which needs to be moved. 
    You need to install an oxygen sensor. the pin the signal wire for the oxygen sensor in the EL ECU is an unused pin in the XF wiring, so you can add a new pin in the right spot. 
    You need to run a MAP sensor and IAT sensor. these sensors align with the pins in the XF wiring for VAF and VAT (vane air flow and vane air temp) (one of these two is the single pin that must be moved in the wiring harness) 
    You must use an E series ISC valve and remote mount it and pipe it to the engine to the same fittings as the factory ISC valve. The solenoids operate on a different duty cycle, and the EL ECU will do weird shit to the XF unit, and the car will not idle properly, and hold RPM when you don't want it to. 
     
    Above is the hardest things. 
     
    The pros; 
     
    - Faster throttle response. and I mean basically zero lag from the moment you touch the throttle. 
    - Higher rev range. the engine WILL rev happier and better. 
    - Power and Torque increase. 
      -  My engine is original and has 350,000km on it. its tired and low on compression, but doing this conversion made significant improvements to the car engine performance. 
     
    As Dean said above, I did return the car back to stock, because I was having major running issues, and i got sick of not being able to drive the car. after fault finding for weeks, the issue ended up being nothing to do with the EL ECU conversion, but it was the coolant temp sensor that had failed. I never went back to the EL ECU to try it again since replacing the temp sensor, and have no geared up to go to Haltech for my when my fresh crossflow goes in. 
     
    Going to Haltech is not a cheap exercise. the ECU itself is thousands of $$$, then I had a patch harness made by a pro, so the haltech will be plug and play with the factory wiring, another $500-$600, then there is the wideband oxy sensor and controller (Haltech proprietary) another $500+  then tuning on top. im still yet to purchase the wide band oxy and controller. 
     
    If you are just looking for a way to improve a freshly warmed up crossflow and leave it at that, go the EL ECU conversion. if you know you're way around a computer and have any idea about fuel mapping, buy the tuning interface and tune the J3 yourself. finding a tuner to work on the J3 now is getting pretty hard. 
     
    If you want a big horsepower fine tuned engine, go to Haltech, but be ready to spend $$$. 
     
    As for the manifolds, they will flow. They will take boost and flow quite well. they run a massive throttle body, so much so that XF throttle bodies are an upgrade for VL Turbo commodores on the RB30s. 
    As Dean mentioned, the long runners are great for low down torque. my Ghia wagon pulls like a freight train, even with stock injection and the high kms, it hauls really good. is it fast? god no. does it rev? god no. its done and dusted by 4000rpm. but with the tall gearing, at 4000rpm in 3rd gear, im pulling well over 100km/h. 
    Do the manifolds limit power and RPM? maybe and maybe. however there are EFI turbo crossflows out there, that were making 290rwkw 10-15 years ago, with less sophisticated aftermarket ECUs. using the stock intake manifolds. 
     
    Again as Dean said above, valve springs are the biggest issue with RPM. 
     
    My new crossflow for my car runs a mid range cam from crow cams. its rev range is up to 5500-6000rpm. for this reason, the head on the new engine has heavy valve springs and roller rockets. 
    I plan to make that thing rev, while keeping it turn key reliable with fuel injection, driven by haltech. 
     
    E2 heads are indeed the best factory crossflow head. they are the unleaded EFi heads, so XF. 
     
    I hope this all helps. if you decide to go down the EL ECU conversion, I can give you loads of info, and photos from my conversion. 
     
  5. Cool
    deankxf reacted to Stumps in EFI Crossflow..worth playing with   
    Yep it's a scary little 2litre that one, I've embarrassed VE and VF V8's and the odd XR6T with that thing, its been and awesome car over the last 5 years. 
     
    I'd love to shove that running gear in the XB, but a 4 banger XB just doesnt sit right with me...
     
    So I'll have to just try to come close with the XB, luckily weight is on the XB's side compared to the FG...so If I can use gearing and a lighter weight to compensate for the lack of boost, then that will be good, not after a side by side comparison but something close and fun...
     
    Still wont even come close to fuel economy of that ecoboost, it'll do 6.4 litres per 100 kays all day long on the highway sitting on 113kmh's...
     
     
  6. Like
    deankxf got a reaction from Stumps in EFI Crossflow..worth playing with   
    top end noise is likely just lifters needing cleaning. if you can be bothered pulling them apart. with my ones in the past, going up slightly thicker oil shut mine up. 
    risk of losing the shims and stripping rocker assy threads in the head when messing with old stuff. 
     
    ecoboost power/torque would be hard to match without boost on any of the engines above. 
     
     
     
  7. Like
    deankxf reacted to Stumps in EFI Crossflow..worth playing with   
    Hey, i'm just collecting bits while can for the XB and this EFI crossflow came my way, seemed too good to just leave.
     
    I know if I went carby it'd be very useful in the XB, but my end goal is for that car to run EFI and hoping to get it to behave more like my G6 ecoboost (228rwkw's).
     
    I'd be over the moon if it could crack a 13, but would also be happy if the old girl had 100-150 more hp at the flywheel.
     
    Really just weighing up cost vs performance vs effort vs cool factor.
     
    Happy to spend a bit of money if the end result is worth while but at the same time I dont wanna put to much effort in to it, far too old, fat and lazy to be swinging of spanners all the time these days.
     
    List of engines I got to work with currently.
     
    250 log motor in XB, 77000km's original
     
    250 2V fresh rebuilt but may be getting sold before too long but still an option right now
     
    XG 4.0 EFI, running but probably wants a freshen up, bit noisy in the topend.
     
    AU VCT 4.0, has about 170K km's and would need a freshen up I'd say
     
    XF EFI crossflow 4.1, has 200k+ km's and will need rebuilding
     
    XE carby 4.1 same deal as the XF motor
     
    I have the correct bellhousings to suit either the Sohc motors or the Crossflow and the car already has the XG 3.27 LSD in it.
     
     
     
     
  8. Like
    deankxf reacted to Thom in Wheel and tyre size for XB falcon sedan   
    Crossflows are a better engine overall, but this does wake the pre Crossflows up significantly, especially with a set of extractors and a cam, in saying that I've had some real turd Crossflows that didn't go as well as a stock 250 pre xflow, if you have a good running non smoking or oil burning pre xflow already in a car i would go with the modified log head, if you have a known good Crossflow I would go that route, if purely chasing power a Crossflow is a better engine, the biggest advantage the pre Crossflows have is sound, the shared centre exhaust port makes them sound better than the later 6 cylinders (especially if you run a set of split extractors and a twin exhaust the earlier 6 cylinders sound all the world like a windsor at low to mid rpm) modifying the 1v head to take a 2barrel really wakes them up, especially if you get the distributor re curved, the make more power everywhere and would be comparable to a midly tired xflow that still had some life left but had lost a bit of enthusiasm

    Sent from my SM-A166P using Tapatalk

  9. Cool
    deankxf got a reaction from Stumps in Wheel and tyre size for XB falcon sedan   
    @Thom machined an XB style head for a weber 34ADM (XE XF carb) once, 
    My Dad told me probably 30yrs ago they used to machine that whole intake off and bolt on a flange and make their own intake manifolds. (porting the intake in the process)
    back in the days before CNC machining etc even.. 
     
    the holley sniper is pretty versatile, i saw one on a gemini 1600 once and it was running fine (was planning to blow through turbo it, but it was NA and running well also) 
    the appeal was to make it hide under a stock air cleaner and make the turbo pipes appear factory. (no idea if it went that way, but would be cool on an XB engine also)
     
     
    interesting reading this post i googled, someone saying they fitted side draught SU carbys to those heads, and ported while they were in there.
    https://www.facebook.com/groups/2139811062888951/posts/2541421079394612/


  10. Cool
    deankxf reacted to Thom in Wheel and tyre size for XB falcon sedan   
    I've done a couple of 1v to 2v conversions, this one was for a 2bbl holley, but personally I think they work better with a xflow webber, as far as your running on issues you problem may be you curb idle is set too high because you don't have enough initial timing, see if you can get a base timing of 8-12 degrees (wherever it is happiest) with the vac advance blocked off and try to get the throttle adjusted to as far closed as possible while maintaining a steady idle, if you can get it to idle cleanly and not run on when you shut the car off your idle circuit or an air bleed may be blocked

    Sent from my SM-A166P using Tapatalk


  11. Like
    deankxf got a reaction from Stumps in Wheel and tyre size for XB falcon sedan   
    might be due to carbon build up on the pistons etc,
    could  be lean mixture, air leak on intake under carby (brake booster even) 
     
    check dizzy advance mechanisms are working (vacuum and mechanical) 
  12. Like
    deankxf reacted to Stumps in Wheel and tyre size for XB falcon sedan   
    Definitely gotta sort out the ignition, pre ignition in this engine is terrible on 98, I have retarded the timing as far as I can with out making it a complete pig to start, but switching off still gives a couple of splutters, at least it isnt pinging under med-heavy loads now like it was, but it seems to have dropped of a bit of power down low compared to how it was.
  13. Like
    deankxf got a reaction from IVC434 in XC sedan - Rear seat removal.   
    they possibly have more "value" than $50 each in some sense (not in inflation as legal tender though) i sold a set of paper notes about 15yrs ago for about $150, ($88 worth of notes) in similar condition to the above.. being that old, they could even be worth more. 
    I'm sure you have some other personal effects to put them with though, but it's a really cool story..


    My best money story was an EA falcon i bought for $100 that had $46 of coins under the back seat, I assume the messy owner (looked like a tip inside) used to throw his change over his shoulder from maccas etc. 
  14. Like
    deankxf got a reaction from Stumps in Wheel and tyre size for XB falcon sedan   
    clutch plate splines are different 3sp to the others 
    flywheel is same probably from XA to leaded XF , then unleaded XF (86DA engine block casting) got the e series size crank bolts (smaller i believe) otherwise same. 
     
    (just keeping the info correct incase chatgpt wants to tell someone how to do this conversion 20yrs from now)
  15. Like
    deankxf reacted to Stumps in Wheel and tyre size for XB falcon sedan   
    Cool might have a properly look when I get home from work.
     
    The flywheel splines are different from the 3 speed to the T5, but it was no biggie, had a spare XF flywheel so while everything was off, had it swapped over.
  16. Like
    deankxf got a reaction from Stumps in Wheel and tyre size for XB falcon sedan   
    on the V8 XEs i have seen the XF pump (same type as XG) mounted to the XE V8 bracket, (XE 6cyl you have currently is same as the V8 pump) 
    so it may be fairly easy to fit, if not a direct bolt up.. I've seen it many times on the V8s. (not sure about belt alignment etc but it's likely possible.

    99% sure the hose fitting is different, but it might screw into the XE adapter at the pump.. can't remember. 

    i know the 3 speed clutch splines are different to the T5/single rail. but expected the flywheel to be same otherwise, been a long long time since i've seen an XB set up though. 
     
     
  17. Cool
    deankxf reacted to Stumps in Wheel and tyre size for XB falcon sedan   
    With that said if the fitting doesn't fit the XG pump I'll just bite the bullet and buy a new XE style pump....been spending big time on this car might as well keep going at this point...Wifes already unhappy at the costs lol
     
    But at least I let her drive it...

  18. Like
    deankxf reacted to Stumps in Wheel and tyre size for XB falcon sedan   
    Sorry, that meant to say needed to fit an XF flywheel and clutch as the XB flywheel was different and wouldnt allow the later 5 speed style Exedy clutch plate to bolt to it.
     
    If you look closely at the pics you will see that flexible hoses have been used instead of the steel lines that normally are used, they dont look as tidy but I can change the pump over without changing the lines, hopefully the XG pump will bolt up to the brackets, I haven't tried it yet, I just wanted to get the car on the road and take it for a drive.
  19. Like
    deankxf got a reaction from Stumps in Wheel and tyre size for XB falcon sedan   
    leave it as is, would be perfect as is i bet for Me.
     
    the XE power steering pump (fitted now) don't like being run low on oil even once (the 5litre E series use this pump)
    the XF pump/bracket is a bolt on, and will need a new hose or at least adapted but are a better pump.. (also look more oldschool than the XE one being metal cased) they are quieter and more forgiving/reliable. 
    (even the XB era power steering pumps are better than that XE one for noise, but they are rare.. do look the part when fitted to a log engine though)
     
    later XF flywheel and clutch is going to be the same as what's in it now other than you'd need to drill the flywheel to crank bolt holes bigger from memory. what's the reason you think this needs changing?
    you can drill the flywheel for the 6 bolt e series pressure plate from memory, but i don't think they are much better in clamping force anyway than a 30% heavier aftermarket XA- XF clutch plate/cover that bolts on to what's in it now. 
  20. Cool
    deankxf reacted to Stumps in Wheel and tyre size for XB falcon sedan   
    The power steering pump is a bit whiney and probably wants replacing, but it does the job for now, I'll get around to sorting that out shortly.
    Fitting the T5 was a bit of drama, needed to replace the flywheel and the clutch with a later XF one, but the hydraulic mechanism was retained and works really well, nice and smooth.
     
    we had to redo the passenger side of the exhaust as were it came out of the extractors and crossed under the gearbox hit on the body of the T5 and required modding to clear the gearbox.
     
    I probably spent wayyy to much money getting the work done but it's been totally worth it in terms of how much better the car drives now, it's become such a mild mannered cruiser now....just cant get the smile off my face every time I chuck around Wagga in it.
     
    /end Brag
  21. Cool
    deankxf reacted to Stumps in Wheel and tyre size for XB falcon sedan   
  22. Like
    deankxf reacted to Stumps in Wheel and tyre size for XB falcon sedan   
    Well just thought I'd give an update, it's been a little while, things have been going slow for a bit but we got back on track last week and the car is back on the road now.
    It is so surprising how different it drives now that it has power steering and a 5 speed in it, it feels more like an XF than a clunky old XB now. the front end is very direct and it can be chucked through corners without any major effort or straining, the 5 speed has added and extra 15km/h to the top speed which is surprising considering the diff ratio drop from 2.92 to 3.27 which helps out down low.
     
    now on to sorting the engine out, the car is literally begging for about 100-150 more horse power....maw hahahaha

  23. Like
    deankxf got a reaction from IVC434 in XC sedan - Rear seat removal.   
    they possibly have more "value" than $50 each in some sense (not in inflation as legal tender though) i sold a set of paper notes about 15yrs ago for about $150, ($88 worth of notes) in similar condition to the above.. being that old, they could even be worth more. 
    I'm sure you have some other personal effects to put them with though, but it's a really cool story..


    My best money story was an EA falcon i bought for $100 that had $46 of coins under the back seat, I assume the messy owner (looked like a tip inside) used to throw his change over his shoulder from maccas etc. 
  24. Cool
    deankxf reacted to IVC434 in XC sedan - Rear seat removal.   
    I have to share this with you. 
     
    As I've said, my grandfather owned the XC I now own and it has a long history in our family. 
     
    Granddad stopped driving in 88 or 89 and the car was last registered in 1990. 
     
    Before he passed away in 1998, he told me and Mum that he didn't care what we did with the Falcon, but if we sold it, we should just have a look behind the seats first in case there was anything that had fallen behind them... 
     
    Well, after your tips that helped me and my mate get the rear seat out, we found the usual junk. Lolly wrappers, bits of Lego, the odd 1c coin.
     
    Then my mate Sean said, "Hey! What's this?"
     
    He held up three paper $50 notes. 
     
    That was what my grandfather was hinting at all those years before... 
     
    Not ashamed to say, I did have a few tears and so did Mum. 
     
    Bless his heart. Took me over 3 decades, but I finally found the surprise that he left for me... 
     
    That's reaffirms why I have such a sentimental attachment to that old car...

  25. Like
    deankxf reacted to bear351c in LED headlights - legality?   
    I looked into the Bangin' Headlights that people rave about, excellent light and look original, but, at around $250 they can shove that......I ran Narva relays on new sealed beams, made a heap of difference. 
×