Jump to content

BoostedXD

Members
  • Content Count

    21
  • Joined

  • Last visited

About BoostedXD

  • Rank
    Newbie

Recent Profile Visitors

1,804 profile views
  1. BoostedXD

    no stop lamps in zl

    Often blows the test panel if you have hooked a trailer up or have a short in the brake light circuit.
  2. BoostedXD

    twin LPG port so i can run twin lines

    That's them. I modified the siphon tube to turn it around so the lid can close.
  3. BoostedXD

    twin LPG port so i can run twin lines

    Hey Wes, were you able to get the lid shut on the tank like this, I couldn't, just kept hitting the top hose and not allowing it to close all the way..?
  4. BoostedXD

    twin LPG port so i can run twin lines

    Crap photo in the dark, but gives you the idea.
  5. BoostedXD

    twin LPG port so i can run twin lines

    Mate you will find if you mount them like this you won't be able to close the lid. What I did was remove the normal feed valve, flip the siphon tube 90deg and put it back in so it aims down. The way I have mine, the lid closes fine. I need mine signed off by a gas certified before the engineer will sign off, but I don't see an issue with that at all.
  6. BoostedXD

    Water in sump

    That stud goes straight into the water jacket, so that's common to leak if not sealed somehow. As for it happening infrequently, I'd say its linked to humidity and condensation. Put a catch can on it if you don't already. Mine traps about 100mls every 2-3 months and crap fuel in high comp engine can also lead to water mist from the combustion in the block. Put a catch can on it and make sure it has some form of suction back into the intake and it should go away
  7. BoostedXD

    Water in sump

    Yeah may be just condensation. I had this last year about this time, I was concerned about milky water and drops of water in the oil, but dipstick always clear oil. I ended up compression testing , all good, so got the whole lot pulled down and checked and nothing wrong. To stop the condensation, all I did was instead of having the breather on the catch can go to atmosphere, I just attached a hose to the top side of the carb hat, so gave slight suction to keep the water mist or condensation out of the engine, and its all gone. Still get milky oil on underside of the cap until its warmed up if I haven't driven it in a week or so. Depends how much water and how you found it. I first found mine last year when dumping the oil, started seeing milky oil on underside of oil cap, so dumped the oil and found about a cap full of water in the oil and panicked, but ultimately it was all fine, but cost me $1200 to strip clean and test to be sure..!
  8. BoostedXD

    Megasquirt Updates

    Yeah good call, I've had mine on the shelf for a few months waiting for a chance to set it up... If you get it working OK, let us know anyway
  9. BoostedXD

    Megasquirt Updates

    Crazy, you ever looked into this option? http://m.rx7club.com/showthread.php?t=975008 http://www.msextra.com/forums/viewtopic.php?f=122&t=43883&start=20 I have bought the adaptor from Hong Kong for $7 delivered, just need to configure it and give it a go using the android shadow logger
×