Jump to content

Rodders

Members
  • Content Count

    39
  • Joined

  • Last visited

Everything posted by Rodders

  1. How do you get the door hinge bolts back from inside A Pillar? I can’t even see them. The bottom ones. Yoiks!!! Sent from my iPad using Tapatalk
  2. Rodders

    Door hinge bolt dropped down A Pillar

    I’ll give that a go when I get a chance. Thanks. Sent from my iPad using Tapatalk
  3. Rodders

    Door hinge bolt dropped down A Pillar

    No, does that help? Sent from my iPad using Tapatalk
  4. Rodders

    Ford Xf Fairmont Ghia (Papou) - Rebuild/Help

    I too need mobile rust repair in South East Melbourne. But in front of wheel arch. Let me know how you go. Sent from my iPad using Tapatalk
  5. Rodders

    Tailgate adjustment?

    Why does my XF tailgate close too far? I can’t seem to find the adjustment in it. Am I missing a seal that should push it back a bit? Is there an adjustment anywhere? Aggghhhhh! Sent from my iPad using Tapatalk
  6. Rodders

    Tailgate adjustment?

    Thanks mate, I’ll give it a go. Sent from my iPad using Tapatalk
  7. Rodders

    Tailgate adjustment?

    You mean these? Sent from my iPad using Tapatalk
  8. Hi folks, I’m off to the wreckers this weekend. What’s the quickest way to remove front doors? (Gotta keep the wife’s anger to a minimum). What else do you guys grab from the wreckers. I’m new to falcon projects and am loving it. (Use to muck about with English stuff, but got sick of the oil leaks). Cheers, Rod. Sent from my iPad using Tapatalk
  9. Rodders

    Quickest way to remove xf doors

    Took the cover from the wheel arch off, and undid 6 nuts. Took no time at all. Couldn’t believe how easy the job was. No redback spiders. But plenty of mud I had to kneel in. Sent from my iPad using Tapatalk
  10. Rodders

    Quickest way to remove xf doors

    Doors came off super easy. So pleased I asked the question of help. I usually find the longest way to do something the first time. Thanks. Sent from my iPad using Tapatalk
  11. Rodders

    Quickest way to remove xf doors

    Will do. Sent from my iPad using Tapatalk
  12. Rodders

    Quickest way to remove xf doors

    If you need anything Dean, let me know. Sent from my iPad using Tapatalk
  13. Rodders

    Quickest way to remove xf doors

    Imlacks. There is a few xf utes there. 1 was so similar to mine, it made me feel sad to see it so stripped. Might have been better than mine on arrival. Sent from my iPad using Tapatalk
  14. Rodders

    Quickest way to remove xf doors

    Thanks guys. It’s my third trip. I’m getting addicted. My list so far is: - S pack rim x1 - drivers seat belt, - couple of miscellaneous screws - door (LH priority, and RH is all goes well). - 1/4 panel LH The place I’m going in South East Melbourne allows Sabre saws, so I’m charging the battery for extra fun. Sent from my iPad using Tapatalk
  15. Hi Guys, Any advice on how to remove my 86 XF passengers seat belt buckle extension? The drivers seat had bolts that went through the floor, and nuts on the bottom, all removed okay, then seat belt buckle extension remove to free it from seat. My problem is the passengers side. The seat itself, is all loose. [emoji16]The seat belt buckle extension goes through a metal loop, which is giving me the frustration. I tried to undo the seat belt buckle extension bolt from inside the car, (under car has a nut that is fixed to chassis). The bolt head was tight, and after turning 1 full turn, it now seems like it’s not wanting to turn. If you can’t undo the bolt in blue, then how do you get the seat out? Also what is all the other electrical gear shown in photo? It is a previous amp and stereo? Do I cut it out or leave it it? Thanks for you help. Sent from my iPad using Tapatalk
  16. Rodders

    Help - seat removal and seat belt

    Thanks guys. Seat is out. I ran a tap up the bolt from under the Ute. Sure was a terrible state. Thanks for the help. Sent from my iPad using Tapatalk
  17. Rodders

    XD-XE-XF ID codes

    No drama about extra paint, I am sure I can find something a spray. I rang 13ford, the vehicle was a “commercial order”. (No “option 36” in the I.D. plate) Would it be a D4 HORIZON BLUE EJA ? Sent from my iPad using Tapatalk
  18. Rodders

    XD-XE-XF ID codes

    Turns out robins egg blue is different. [emoji25] Some more googling, and I recon this might be close, http://www.ozfalcon.com.au/index.php?/topic/1877-1989-xf-falcon-ute/ I’ve messaged the poster, but if anyone could identify that paint, I’m happy to try yet another pressure pack can, [emoji125][emoji3603] Thanks. Sent from my iPad using Tapatalk
  19. Rodders

    XD-XE-XF ID codes

    You Google powers are better than mine. I kept Google-ing with falcon as one of the search terms and got nothing. And being a man I could see it [emoji856] Thanks Dean. [emoji106] Sent from my iPad using Tapatalk
  20. Rodders

    XD-XE-XF ID codes

    It is the actual colour. Everywhere I’ve poked around is the same colour, just less scratches. And the I.D. plate specifies the “CZ” which I can’t find a definition of. Was there ever Police utes that were a light blue (almost white) colour? Thanks again you Wizards! Sent from my iPad using Tapatalk
  21. Rodders

    XD-XE-XF ID codes

    Hi guys, Generally speaking, it is a light, light sky blue. (Like a mix of white and light blue). Nothing on it is marked as anniversary, but I’m new to xf falcons, so could be corrected on what to look for. Not the best photo, as it now looks whiter [emoji30] Thanks for your input. If I call ford could they tell me what the mix is? I need to “touch up” a few places. Sent from my iPad using Tapatalk
  22. Rodders

    XD-XE-XF ID codes

    Hey guys, Sorry for the delay to the thread. Anyone know what colour for a “CZ” is for an 86 Falcon XF? Any help would be great. All my searching has got me no closer. Sent from my iPad using Tapatalk
×